Suggestions
Products
Spare parts
Looking for the matching spare part?
Description
The steel wall pool on the Nuovo de Luxe range size Ø 550 x 120 cm is quick and easy to assemble. It can be used all year round due to its strong steel wall, and also its winter-proof inner liner. You don’t have to dismantle it in winter. The extra wide hand rail and solid supporting frame provide a high level of safety and years of pleasure with this pool. Everything is ready for perfect cleaning and circulation with the intake nozzles and skimmer set included. Both swimming pool connection hoses and hose clamps for a filter unit are included in the set. The ladder included makes it easy to get in and out. It can be completely or partially built into the ground.
The set contains:
- Pool Ø 550 x 120 cm
- Water capacity: 25.600 l (Filling height 110 cm)
- robust, galvanised, plastic-coated steel casing (approx. 0.4mm)
- 15 cm wide metal hand rail
- Metal supports
- Floor rails
- winter-proof inner liner (approx 0.4 mm)
- Skimmer and nozzle perforation
- Integrated skimmer and pool inlet nozzle
- Connection hoses and hose clamps
- Ladder
- Teflon thread seal tape
It can be completely or partially built into the ground. Please note the fitting instructions.
Technical Information
Please note that the products shown represent the current scope of delivery, as of 2026.
- Screw set for pool height 120 cm
- Floor rail fastening plate, pool Ø 350/460/550/OVAL
- Handrail fastening plate, for pool Ø 350/460/550/OVAL
- Plastic protective caps for screws
- Plastic floor rail L=1425 mm, for pool Ø 550 cm
- Plastic cover for handrail, round
- Steel casing for pool Ø 550 x 120 cm
- Screw set for pool Ø 550 cm
- Side panel, vertical support
- Handrail for pool Ø 550 cm
- Pool coping L: 95 cm
- Plastic liner protection L=1425 mm, for pool Ø 460/550 cm
- Replacement liner, overlapping, for steel casing pool 550 x 120 cm
- Hose clamp Ø 32 - 50 mm
- Swimming pool hose Ø 32 mm, 100.1 m
- Skimmer set S1
- Entry ladder for pool height up to 122 cm
Videos
Documents
Spareparts
Important Notices
Important Information: The scope of delivery of the item does not include all the material required for assembly and operation.
Depending on the type of construction or the item in question, the following may be required for assembly: leveling material sand/split, floor insulation, etc.
Please note: A cove is absolutely essential for the construction of the pool. Use our Styropor® wedge (art. no. 016041) and a special adhesive Uhu Por (art. no. 060931). The cove is supplied in meter pieces and must be ordered according to your pool size.
A filtration system and water treatment chemicals are required for operation. A heat pump or a solar collector for heating increases comfort. You can find more detailed information in the respective operating instructions, on our YouTube channel or in our online shop
This pool is suitable for freestanding construction, as well as for partial or complete in-ground installation. Note that in the case of in-ground installation (partially or completely), the pool wall must be statically protected against earth pressure. Please refer to the operating instructions for details on how to do this.
In order to be able to set up the pool as quickly as possible, we recommend three persons if possible. The assembly time depends on the number and qualification of the people involved. PLEASE NOTE: Steel wall pools are not suitable for saltwater use due to the risk of rusting.
Attention
Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.
Additional Information
Product images are for reference only and may not be an exact representation of the product.