Steel wall pool Styria round without accessories

  • Galvanised coated steel casing
  • Particularly robust and strong construction
  • Hand rail and floor rails out of plastic
  • Winterproof liner in sand: approx. 0.80 mm
  • Skimmer and nozzle perforation
Notify me when this product is in stock
€99,999.99

Description

Steel wall pools of the Styria series are very robust. The steel wall (approx. 0.60 mm for pools up to 120 cm deep, 0.80 mm for 150 cm deep) and the winter-proof foil (Adriatic blue: approx. 0.60 mm and sand: approx. 0.80 mm) allow year-round use. The round series is suitable for partial or complete ground installation (with pressure protection). Pools with a depth of 1.50 m must be installed at least 60 cm deep. The Skimmer set S1* is used to prepare for water circulation.

Optionally we recommend for the Styria series round up to Ø 450 x 120 cm the Steinbach filter system Classic 250N* or the Steinbach filter system Active Balls+*. For the steel wall pool of the Styria series in round with Ø 500 x 120 cm and Ø 500 x 150 cm the Steinbach filter system Comfort 50* is well suited. For the dimension of Ø 600 x 150 cm we recommend the Filter system Compact 8*.

(*not included in the scope of delivery)

Technical Information

Basin shape
round
Dimension
Ø 500 x 150 cm
Suitable for salt water
no
Area of application
Outdoor
Einbaumöglichkeit
ground installation
part installation
Water capacity
26.500 l
Water fill level
140 cm
Assembly time approx.
180 min
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness: 0,80 mm
Colour of the inner liner: sand
Assembly min. number of persons: 2
Filter system: no
Skimmer: no
Inlet nozzle: no
Hoses: no
Ladder: no
Pool cover: no
Floor protection cover: no
Article number: 012330SA

Please note that the products shown represent the current scope of delivery, as of 2026.

Videos

Documents

Manual 012330SA_ID452_01_14062023_v02-print.pdf 012330SA_ID304_01_13062024.pdf

Spareparts

Looking for the matching spare part?

This way

Important Notices

Important Information: The scope of delivery of the item does not include all the material required for assembly and operation.
Depending on the type of construction or the item in question, the following may be required for assembly: leveling material sand/split, floor insulation, cove (Styrofoam wedges item no. 016041), etc.
A filtration system and water treatment chemicals are required for operation. A heat pump or a solar collector for heating increases comfort. You can find more detailed information in the respective operating instructions, on our YouTube channel or in our online shop: https://www.steinbach-group.com/en/, https://www.youtube.com/@Steinbachgroup
This pool is suitable for partial or complete in-ground installation. A freestanding construction is not possible. Note that in the case of in-ground installation (partially or completely), the pool wall must be statically protected against earth pressure. Please refer to the operating instructions for details on how to do this.
In order to be able to set up the pool as quickly as possible, we recommend three persons if possible. The assembly time depends on the number and qualification of the people involved. PLEASE NOTE: Steel wall pools are not suitable for saltwater use due to the risk of rusting.

Attention

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Additional Information

Product images are for reference only and may not be an exact representation of the product.