Holidays at Steinbach: Get -20% from 12.8. till 15.8. on everything*!
except for styrofoam pools, spare parts, reduced products and the pool equipment box

Steinbach Steinbach

Filter unit Comfort 50

040200
Art.
  • Integrated timer switch
  • Self-priming filter pump with integrated pre-filter and timer switch
  • Connectors for all common pools Ø 32/38 mm
  • 7 way valve with solid adjustment lever
  • Comprehensive range of accessories available

 

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Special Price €287.20 Regular Price €359.00
including 20% VAT
In stock
From € 40,- free shipping
Return free of charge

Product information

The Filter unit Comfort 50 has a circulation rate of 6.600 l/h, the connection is 220-240V~ / 50Hz / 450 W. This filter unit can be used for pools with approx. 33.000 l water content and can be connected to all commercially available installation pools with a hose connection Ø 32/38 mm. The filter unit can be used up to a maximum water temperature of 35 ° C. To maintain crystal-clear and sparkling pool water, the filter system can be operated with filter sand as well as with Steinbach Filter Balls as filter medium.

040100_05.jpg

Large pre-filter

The large pre-filter stops coarse dirt particles from getting in. This protects the filter pump fro damage, and also helps stop overloading the main filter area right at the front end. A reduction in the amount of pool care chemicals is just one advantage of this.

040100_07.jpg

7 way valve

Everyone has a 6 way > here there are 7 options for optimum operational quality and crystal-clear water.
Filter, backwash, rinse, empty, circulate, winter setting, closed
Using the solid dial, you can carry out the whole water cleaning process without getting wet, or having to block off or dismantle anything.

040100_09.jpg

Solid clamping ring

A quality checked, solid clamping ring connects the filter holder to the 7 way valve. A large rotary knob makes it easy to close without any tools.

040100_08.jpg

Large chamber for filter sand

Once the 7 way valve is removed, the chamber for the filter sand is visible. The large opening makes it easy and, above all, easy to change the filter sand. With above ground pools, this should be changed every 1 - 2 years.

Filter system:
Salt water suitable: yes
Water capacity: 33.000 l
Circulation capacity: 6.600 l/h
Boiler size: 415 mm
Connection size: Ø 32/38 mm
Valve type: 7-way valve with pressure gauge
*Sound pressure level: < 70 dB(A)
Water temperature: 10°C - 35°C
Usable filter medium 1: filter sand
Quantity of filter medium 1 used: 15 kg
Sand grain size: 0,70 - 1,20 mm
Usable filter medium 2: 400 g
Quantity of usable filter medium 2: 400 g
Pump part number: 040916

Filter pump:
Power supply: 220-240V~ / 50Hz
Pump power: 450 W
Transformer: no
Pump power: 8.500 l/h
Operating principle: self-priming
Head: 9,00 m
Pre-filter: yes
Timer present: yes
Time switch: {751}
External timer possible: {673}
Protection class: IPX5
Insulation class: F
Cable length to unit: 1,50 m


* Emission sound level comparable to a large household appliance

01 Grip for 7-way valve
€7.49
including 20% VAT, plus shipping costs
Free shipping
02 7-way valve, blue, used as of 2009
€60.90
including 20% VAT
03 Spider gasket for 7-way valve
€17.90
including 20% VAT, plus shipping costs
04 Plate, eliminator, used as of 2020
€3.99
including 20% VAT, plus shipping costs
05 Locking ring, right, used as of 2009
€13.90
including 20% VAT, plus shipping costs
06 Pin for locking ring, used as of 2009
€1.49
including 20% VAT, plus shipping costs
07 Locking ring, left, used as of 2009
€13.90
including 20% VAT, plus shipping costs
10 Filter container, blue, used as of 2009
11 Separating plate, used as of 2009
€4.99
including 20% VAT, plus shipping costs
12 Screen base, used as of 2009
€10.90
including 20% VAT, plus shipping costs
14 Base plate, plastic, black
€11.90
including 20% VAT, plus shipping costs
15 Filter pump SPS 75-1 T
Special Price €127.20 Regular Price €159.00
including 20% VAT
16 Connection hose, L = 25 cm, Ø 38 mm
17 Hose clamp Ø 30 - 50 mm
€3.99
including 20% VAT, plus shipping costs
18 Screw cover with seal
€6.49
including 20% VAT, plus shipping costs
19 Manometer 1/8" for Comfort series
€8.99
including 20% VAT, plus shipping costs
21 Gasket for adapter
22 Screw fitting for SPS prefilter cover
€4.99
including 20% VAT, plus shipping costs
23 Transparent prefilter cover
€9.99
including 20% VAT, plus shipping costs
24 O-ring Ø 79 mm for prefilter cover
€2.49
including 20% VAT, plus shipping costs
25 SPS screen basket
€5.99
including 20% VAT, plus shipping costs
26 Drain screw, including seal
€1.49
including 20% VAT, plus shipping costs
29 SPS mechanical seal
€17.90
including 20% VAT, plus shipping costs
31 Fastening kit for filter pumps
€3.49
including 20% VAT, plus shipping costs
33 O-ring Ø 54 x 3 mm
€1.49
including 20% VAT, plus shipping costs
01 Grip for 7-way valve
€7.49
including 20% VAT, plus shipping costs
Free shipping
02 7-way valve, blue, used as of 2009
€60.90
including 20% VAT
03 Spider gasket for 7-way valve
€17.90
including 20% VAT, plus shipping costs
04 Plate, eliminator, used as of 2020
€3.99
including 20% VAT, plus shipping costs
05 Locking ring, right, used as of 2009
€13.90
including 20% VAT, plus shipping costs
06 Pin for locking ring, used as of 2009
€1.49
including 20% VAT, plus shipping costs
07 Locking ring, left, used as of 2009
€13.90
including 20% VAT, plus shipping costs
10 Filter container, blue, used as of 2009
11 Separating plate, used as of 2009
€4.99
including 20% VAT, plus shipping costs
12 Screen base, used as of 2009
€10.90
including 20% VAT, plus shipping costs
14 Fastening kit for filter pumps
€3.49
including 20% VAT, plus shipping costs
15 Base plate, plastic, black
€11.90
including 20% VAT, plus shipping costs
16 Filter pump SPS 75-1 T
Special Price €127.20 Regular Price €159.00
including 20% VAT
17 Connection hose, L = 25 cm, Ø 38 mm
18 Hose clamp Ø 30 - 50 mm
€3.99
including 20% VAT, plus shipping costs
19 Screw cover with seal
€6.49
including 20% VAT, plus shipping costs
20 Manometer 1/8" for Comfort series
€8.99
including 20% VAT, plus shipping costs
€1.49
including 20% VAT, plus shipping costs
02 Fastening pin, used: (07/08)
At the moment this product is not available
03 6-way valve, top part, used: (07/08)
At the moment this product is not available
04 Hose clamp Ø 30 - 50 mm
€3.99
including 20% VAT, plus shipping costs
05 Connection hose, L = 25 cm, Ø 38 mm
07 Seal for valve head, used: (07/08)
At the moment this product is not available
08 Plastic ring, used: (07/08)
At the moment this product is not available
11 Pressure spring, used: (07/08)
At the moment this product is not available
12 Manometer 1/8" for Comfort series
€8.99
including 20% VAT, plus shipping costs
13 Valve disk with seal, used: (07/08)
At the moment this product is not available
17 Locking ring, used: (07/08)
At the moment this product is not available
18 Plate (eliminator), used: (07/08)
At the moment this product is not available
23 Base plate 600 x 380 x 120 mm, used: (07/08)
26 Separating plate, used: (07/08)
At the moment this product is not available
27 Screen base, used: (07/08)
At the moment this product is not available
28 Filter container, used: (07/08)
At the moment this product is not available
01-03/06-08/11/13-15 6-way valve, used: (07/08)
At the moment this product is not available
09/10 Screw cover with seal
€6.49
including 20% VAT, plus shipping costs
21/22 Container drain screw, used: (07/08)
At the moment this product is not available
-20 %
Free shipping
Special Price €103.20 Regular Price €129.00
including 20% VAT
Special Price €127.20 Regular Price €159.00
including 20% VAT
€3.49
including 20% VAT, plus shipping costs
02 Pin for locking ring, used as of 2009
€1.49
including 20% VAT, plus shipping costs
04 Hose clamp Ø 30 - 50 mm
€3.99
including 20% VAT, plus shipping costs
05 Connection hose, L = 25 cm, Ø 38 mm
12 Manometer 1/8" for Comfort series
€8.99
including 20% VAT, plus shipping costs
17 Locking ring, left, used as of 2009
€13.90
including 20% VAT, plus shipping costs
18 Locking ring, right, used as of 2009
€13.90
including 20% VAT, plus shipping costs
19 Plate, eliminator, used as of 2020
€3.99
including 20% VAT, plus shipping costs
23 Base plate, plastic, black
€11.90
including 20% VAT, plus shipping costs
26 Separating plate, used as of 2009
€4.99
including 20% VAT, plus shipping costs
27 Screen base, used as of 2009
€10.90
including 20% VAT, plus shipping costs
28 Filter container, blue, used as of 2009
29 Fastening kit for filter pumps
€3.49
including 20% VAT, plus shipping costs
30 Grip for 7-way valve
€7.49
including 20% VAT, plus shipping costs
31 Spider gasket for 7-way valve
€17.90
including 20% VAT, plus shipping costs
Free shipping
01-03/06-08/11/13-15 7-way valve, blue, used as of 2009
€60.90
including 20% VAT
09/10 Screw cover with seal
€6.49
including 20% VAT, plus shipping costs
Special Price €127.20 Regular Price €159.00
including 20% VAT
02 Pin for locking ring, used as of 2009
€1.49
including 20% VAT, plus shipping costs
04 Hose clamp Ø 30 - 50 mm
€3.99
including 20% VAT, plus shipping costs
05 Connection hose, L = 25 cm, Ø 38 mm
12 Manometer 1/8" for Comfort series
€8.99
including 20% VAT, plus shipping costs
17 Locking ring, left, used as of 2009
€13.90
including 20% VAT, plus shipping costs
18 Locking ring, right, used as of 2009
€13.90
including 20% VAT, plus shipping costs
19 Plate (eliminator), used from 2009 to 2020
At the moment this product is not available
23 Base plate, plastic, black
€11.90
including 20% VAT, plus shipping costs
26 Separating plate, used as of 2009
€4.99
including 20% VAT, plus shipping costs
27 Screen base, used as of 2009
€10.90
including 20% VAT, plus shipping costs
28 Filter container, blue, used as of 2009
29 Fastening kit for filter pumps
€3.49
including 20% VAT, plus shipping costs
30 Grip for 7-way valve
€7.49
including 20% VAT, plus shipping costs
31 Spider gasket for 7-way valve
€17.90
including 20% VAT, plus shipping costs
Free shipping
01-03/06-08/11/13-15 7-way valve, blue, used as of 2009
€60.90
including 20% VAT
09/10 Screw cover with seal
€6.49
including 20% VAT, plus shipping costs
Special Price €127.20 Regular Price €159.00
including 20% VAT

FAQs from category Sand filter systems:

No, the filter system may only run when the pool is not in use. On the one hand, there is a risk of injury from the suction nozzle, on the other hand, dirt particles are swirled around during use, which the system cannot filter. 

The filter system should circulate your pool water at least twice a day. Our Comfort 75 filter system, for example, manages approx. 8,000 litres per hour and can therefore completely circulate a pool with 19,000 litres once in just under 2.5 hours.

Check whether the seal (O-ring) is inserted correctly. If it is not placed with the nose in the groove of the vessel, the 7-way valve does not close properly and there is a higher distance between the 7-way valve and the vessel. Check whether the partition in the sand and clean water chamber area is correctly inserted in the sieve bottom. If not, the 7-way valve is also too high. Make sure that the seal at the top of the filter tank is in clean and perfect condition and that no sand is sticking to it. You can coat the O-ring with Vaseline. This serves to preserve the O-ring and additionally supports the sealing. Check that the 7-way valve is correctly fitted with the notch on the underside of the cover and the notch on the filter. Place the 7-way valve on the filter vessel, preferably with the help of a second person. Press the lid onto the filter bowl and make sure that the lid is flush with the vessel.

It is best to close the clamping ring with the help of a second person. A screw clamp can be used as an aid. The clamping ring must be tapped over the skeleton of the valve cover and vessel. If tapping with the palm of the hand is not enough, a rubber mallet can also be used. Start tapping at the back of the bolt and hit the tension ring evenly on the right and left until the ribbed pattern disappears. Then the clamping ring can also be easily closed with the bolt. The closure requires some force and must be a little stronger, as the vessel builds up pressure when used and must seal 100%. Do not use an ordinary hammer under any circumstances. Damage caused by this is not covered by the warranty or guarantee.

When filling the vessel with sand, check that the sieve bottom and the separating plate are correctly inserted. Before filling sand into the vessel, add approx. 20-30 cm of water to the vessel and fill the sand slowly to avoid damage due to the weight of the sand. Before the first filtering process, you must filter out the undersize particles of the sand. To do this, backwash for several minutes until clear water comes out of the backwash connection. If the sieve bottom or the separating plate are damaged, replace them. Please also observe the instructions for your filter system.

Fill the pump with water, loosen the transparent cover on the filter container (do not unscrew completely) to remove trapped air. Tighten the cover again when all air has escaped. Check all connections and hoses for leaks or holes. Retighten connections or hose clamps, seal with Teflon tape and replace the defective parts if necessary.

If the pressure in the boiler is too high, you must clean the filter bed (sand in the boiler) by backwashing. If filter balls are used, check them regularly for the degree of contamination and remove them from the vessel at regular intervals and wash them out. Clean the filter balls with a garden hose or in the bathtub. DO NOT BACKWASH WHEN USING FILTER BALLS! If the pressure in the vessel is too low, you must check the pre-filter for dirt and clean it so that sufficient water can flow into the pump. Check the water level and the height of the hanging skimmer; if the water level is too low, too little water will flow into the pump. Check the pressure gauge for damage. Clean the pressure line and empty the pre-filter basket. It could be that the suction line or the pre-filter basket are blocked. If the operating mode is set to "CLOSED", use another operating mode. It could be that the drain nozzle is closed. If this is the case, open it.

Depending on the grain size, the filter sand must be changed after three to five seasons.

Check your socket for power and test another socket if necessary. Never run the pump without water, the pump may run dry and burn out. Check the mains plug or the connection cable for damage. Check the running time of the external timer. Check the running time of the timer, if it is set.

Rust may have accumulated over the winter, which prevents the pump from starting or makes grinding noises when it is switched on. If the rust build-up is not too bad, this fault can be easily remedied. On most pumps, there is a small recess in the cover for ventilation, behind which there is a screw. Use a screwdriver to loosen the screw slightly and spray it with lubricant (e.g. WD40). If the rust has not settled too much, the pump will work again.

If you open the lever of the way valve valve during operation, the water will flow with pressure from all openings. The pressure drop may cause damage to the unit.

Remove the transport lock from the button cell battery. Check the battery and replace it if necessary. This does not apply to INTEX filter systems.

Remove the transport lock from the button cell battery. Set the external timer at the desired times and then plug the pump into the timer. Now start the integrated timer of the pump and set the time to 24 hours. The pump then starts at the times set on the external timer. This does not apply to INTEX filter systems.

Remove the transport lock from the button cell battery. If you do not remove these, the filter times will not be saved in the event of a power failure. Check the battery and replace it if necessary. (Button cell lithium 3V CR2032)  not work, what can I do?

With Intex sand filter systems, only the integrated timer works; an external timer cannot be connected due to the safety standards.

No, the red lights are not an error message. The lights on the timer are alternately green and red.

All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.

All filter systems and filter pumps have a sound pressure level* of < 70 dB(A). 

*The emission volume is comparable to a large household appliance.

In this case, the filter medium used is often contaminated. The filter medium used (quartz filter sand or filter balls) is subject to a certain amount of wear and tear, even when operated as intended under optimal conditions, and should be replaced at regular intervals, depending on the operating time and degree of contamination. For sand filter systems, switch off the pump and then set the filter setting to ‚Rückspülen/backwash'. Switch the filter system on again. Carry out the backwash process until clean water comes out of the backwash line (max. 2 minutes). When using Filter Balls, do not backwash. If the filter performance decreases, we recommend washing the Filter Balls by hand. If necessary, the Filter Balls should be replaced. In cartridge filter systems, the filter medium should be changed approx. every 2 weeks.

If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.

If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.

Accessories
Other customers also purchased

Important information

Changing the valve position

1. Turn off pump

2. Fully depress valve + turn to desired position

SEE OPERATING INSTRUCTIONS DO NOT CARRY BY THE HANDLE

ATTENTION

Maximum working overpressure 1,5 bar

Do not carry or lift filter by the handle

Turn off pump before changing valve position

Valve Positions:

1 Filtration

2 Rinse

3 Circulation

4 Backwash

5 Closed

6 Empty

7 Winterize

 

Symbol photos

The pictures shown are just for reference, the actual product may differ.