Suggestions
Products
Spare parts
Looking for the matching spare part?
Filter unit Miganeo Speed Clean 7000
- Powerful sand filter unit for pools up to 22,000 l capacity
- Connectors for all common pools Ø 32/38 mm
- 7 way valve with adjustment lever and pressure gauge
- comprehensive range of accessories available
Description
Powerful filter unit for all swimming pool types up to 22,000 capacity.
Technical Information
Please note that the products shown represent the current scope of delivery, as of 2026.
Videos
FAQ
Set the timer on the filter pump to 24 hours. The filter pump is started and stopped with the external timer.
Make sure that you have previously activated the memory backup function of the timer. The following steps must be observed:
- Make sure that the power cable of the pump is disconnected from the power supply.
- Use a PH1 Phillips screwdriver to remove the screws from the timer cover and remove the cover.
- Pull out the plastic strip that can be seen underneath the battery.
- Screw the cover back on again. The timer's memory backup function is now activated.
The memory backup function draws the required energy from the pump battery when the mains supply is switched off. Please note that the battery life - depending on the daily operating time - may be limited to a few weeks.
Documents
Spareparts
Additional Information
Product images are for reference only and may not be an exact representation of the product.