Staloc Adhesive Spray Multi SQ-645, 500 ml

  • Ideal for bonding Styropor®
  • Bonds quickly and reliably
  • Strong initial tack and high final bond strength
  • Fine spray pattern for even adhesive coverage
€29.90
pce

Description

Staloc Adhesive Spray Multi SQ-645, 500 ml, , UN1950

STALOC Spray Adhesive MULTI quickly bonds paper, fabric, foams, leather, cardboard, roof liner fabrics, synthetic coverings, vinyl, insulation mats, rubber and many other materials. Moreover it works on unpainted / varnished metal and wooden surfaces. When applied, the adhesive forms a film with good initial tack and high adhesive strength. The product has been specifically designed for use in industry, construction and crafts. Also suitable for bonding Styrofoam©. Not suitable for polyethylene and polypropylene.


Spray the adhesive onto a previously cleaned and degreased surface. Spray from a distance of 20-25 cm. Depending on surface structure and substrate, provide for 5-15 min of evaporation time. Assemble parts. After use, make sure to turn the aerosol can upside down and press the nozzle until only propellant comes from the valve. This cleans the valve and the nozzle and prevents clogging of the adhesive in the can. Please also wipe away residues of the adhesive from the nozzle.

Technical Information

Article number: 060932
GHS02, Flamme, entzuendlich GHS07, Ausrufezeichen, Achtung GHS09, Umwelt, umweltgefaehrlich
Danger

Please note that the products shown represent the current scope of delivery, as of 2026.

Videos

Documents

221222 SDS-STALOC Sprühkleber Multi SQ-645, 500 ml(AT).pdf 221222 SDS-STALOC Sprühkleber Multi SQ-645, 500 ml(GB).pdf

Spareparts

Looking for the matching spare part?

This way

Attention

H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects.

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read carefully and follow all instructions. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 Do not pierce or burn, even after use. P211 Do not spray on an open flame or other ignition source. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves. P321 Specific treatment (see on this label). P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P405 Store locked up. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional Information

Product images are for reference only and may not be an exact representation of the product.