Cart Cart
Steinbach Steinbach

Poolrunner Twin

061025
Art.
  • Swimming pool cleaner for optimal floor and wall cleaning
  • Fully automatic cleaning mode
  • Integrated filter system

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Notifiy me:

€889.00
including VAT

The Poolrunner Twin is a fully automatic swimming pool cleaner. The "Weekly Timer" can be used to define the time interval at which cleaning should start. The Steinbach swimming pool cleaner is specially designed for optimal floor and wall cleaning of your swimming pool. Special plastic brushes clean both the floor and the wall. With the integrated filter unit, combined with a 20 V, 18,000 l/h strong high-performance pump, a connection to an external filter system is not necessary. The control is fully automatic. The cable connected to the vacuum pool cleaner and control unit is approx. 18 m long. This allows easy cleaning for pool sizes up to 6 x 12 m.

ATTENTION! No suitability for overflow-, stainless steel-, tile pools, as well as pools with an air ring.

POOL CLEANER:
Model: HJ2042
Width of cleaning element: 361 mm
Speed: max. 12 m/min
Immersion depth: max. 2.0 m
Filter mesh: 100 μm
Safety class: IPX8
App control: not available

CONTROL UNIT:
Cable length to the device: 18 m
Rated power: 200 W
Operating voltage and frequency: 220-240 V~, 50 Hz
Output voltage: 20 V =
Safety class: IPX5

POOL:
Pool size - floor area: max. 200 m²
Salt content in water (salt electroysis): < 0.5 %
Water temperature: 10 °C - 35 °C
Ambient temperature: 10 °C - 40 °C

01
Stabilizer handle
Required quantity for your set: 1
€32.90
02
Fixing screw for floor cleaner
Required quantity for your set: 1
€5.99
03
Floor cleaner top part
Required quantity for your set: 1
€35.90
04
Filter unit
Required quantity for your set: 2
€21.90
05
Impact protection
Required quantity for your set: 1
€28.90
06
Cleaning roller (061025)
Required quantity for your set: 1
€72.90
07
Floor cleaner bottom part
Required quantity for your set: 1
€95.90
08
Bearing
Required quantity for your set: 2
€10.90
09
Drive wheel
Required quantity for your set: 1
€20.90
10
L drive belt
Required quantity for your set: 2
€23.90
11
Side cover
Required quantity for your set: 2
€14.90
12
Cable
Required quantity for your set: 1
€176.00
13
Plastic filter bag, black
Required quantity for your set: 2
€12.90
14
Fleece filter bag, white
Required quantity for your set: 1
€12.90
15
Control unit for 061025
Required quantity for your set: 1
€223.00
16
Drive motor
Required quantity for your set: 1
€120.00
17
Filter pump
Required quantity for your set: 2
€116.00
18
S drive belt
Required quantity for your set: 1
€21.90
19
Motor unit (061025)
Required quantity for your set: 1
€274.00
20
Propeller
Required quantity for your set: 1
This product is not available
View detail list
21
Water discharge
Required quantity for your set: 1
€8.49
01
Stabilizer handle
Required quantity for your set: 1
This product is not available
View detail list
02
Fixing screw for floor cleaner
Required quantity for your set: 1
€5.99
03
Floor cleaner top part
Required quantity for your set: 1
€35.90
04
Filter unit
Required quantity for your set: 2
€21.90
05
Impact protection
Required quantity for your set: 1
This product is not available
View detail list
06
Water discharge
Required quantity for your set: 1
€8.49
07
Propeller
Required quantity for your set: 1
This product is not available
View detail list
08
Cleaning roller (061025)
Required quantity for your set: 2
€72.90
09
Floor cleaner bottom part
Required quantity for your set: 1
€95.90
10
Bearing
Required quantity for your set: 2
€10.90
11
Drive wheel
Required quantity for your set: 2
€20.90
12
Cable
Required quantity for your set: 1
€176.00
13
Side cover
Required quantity for your set: 2
€14.90
14
L drive belt
Required quantity for your set: 1
€23.90
15
Filter pump
Required quantity for your set: 1
€116.00
16
Drive motor
Required quantity for your set: 1
€120.00
17
S drive belt
Required quantity for your set: 2
€21.90
18
Motor unit (061025)
Required quantity for your set: 1
€274.00
19
Control unit for 061025
Required quantity for your set: 1
€223.00
20
Plastic filter bag, black
Required quantity for your set: 1
€12.90
21
Fleece filter bag, white
Required quantity for your set: 1
€12.90

FAQs from category Pool robots:

The power cable gets tangled/twisted in the water, what can I do?

Do not leave the cable in the pool all the time. After each use, remove it from the pool and unplug and turn off the cord. Wash the cable with clean water to remove chemical residues after each cleaning operation. Put the cable length into the pool according to pool dimensions, place the remaining cable at the pool edge, i.e. pull overflown cable out of the water. Place obstacles such as built-in pool ladders/installation ladders out of the pool to prevent the cable from getting caught.

The pool vacuum does not reach all parts of the pool, what can I do?

Position the power supply so that the cleaner can easily reach all areas. Switch off the filter pump while cleaning with the pool vacuum. Enter the maximum possible length of the connection cable in the pool, but take into account a corresponding minimum distance between the control unit and the pool. Change the setting of the nozzles. 

The pool vacuum is not climbing the walls, what can I do?

Clean the filter container/filter bag and remove slippery debris such as algae from the pool walls. Put the pool vacuum cleaner into the pool at the optimum water temperature. This is between 10°C and 35°C. Check the drive belts and brushes for wear and replace them if necessary. Set the PH value correctly. This should be between 7.0 and 7.2. Switch off the unit and let all the air escape. Mount the additional buoyancy aids from the scope of delivery.

The cleaner shows no function, what can I do?

Check the plug of the power cord and the control unit or the battery. Plug the control unit directly into a socket and do not use extension cables. Check your house line for overload, the socket may be defective. Contact a qualified electrician.

The cleaner does not sink / emerges / turns in circles on the pool bottom, what can I do?

There is air in the pool vacuum, switch off the unit, let all the air escape and let the pool vacuum sink to the ground. If necessary, adjust the salt content correctly.

The cleaner does not move forward, what can I do?

Check the wheels/drive belts for wear and foreign objects in the drive. Replace the wheels/drive belts if necessary.

I have a salt water pool and the pool vacuum goes over the edge, what can I do?

Check whether the water level in the pool is too high and drain the water if necessary. If your pool liner is a little rough, the pool vacuum will have more grip. Carry out a reduction of the buoyancy. If you have a salt water pool, the buoyancy is slightly higher in salt water; reduce the buoyancy.

The pool vacuum cleaner only moves vertically in the pool, what can I do?

It is necessary to weigh down the pool vacuum cleaner. A weight must be installed for this purpose. Please contact our Service Centre.

I have a stainless steel or tiled pool

Our pool vacuums were designed for liner pools, the above materials have no grip or adhesion for the pool vacuum because the surfaces are too smooth.

What do I do if the INTEX automatic vacuum pool cleaner does not move or moves very slowly?

Pull the cleaning hose and lift the automatic vacuum pool cleaner from the pool floor. The pool floor may be wrinkled, preventing the vacuum cleaner from moving. Check the water flow and make sure that the filter pump is switched on and has the appropriate power. Make sure that the gate valves are open. Clean or change the filter cartridge. For sand filter systems, you must backwash the filter.

The device does not turn on the pool wall, what can I do?

You need to unblock or remove the cleaning lips because the sail, water outlet nozzle or cleaning lip may be stuck.

Symbol photos

The pictures shown are just for reference, the actual product may differ.