Cart Cart

For a short time only: Pool set including all accessories for just € 238,99 SHOP NOW

Steinbach Steinbach

Swimming pool cleaner Whaly

061202
Art.
  • Filter unit with a filter capacity of at least 6,000 l/h required
  • Connection to skimmer with 9.6 m special hose (included)
  • Very suitable for above ground pools

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Notifiy me:

* Mandatory Field

€199.00
including VAT
This product is available in home improvement stores and online shops.

The swimming pool cleaner Whaly is a self-propelling floor vacuum for shapes of pool with a flat floor. It is connected directly to the skimmer using the special 9.6 m hose (included). Filter pump power of at least 6,000 l/h is required for optimal cleaning performance.

05
Konusgetriebe
Required quantity for your set: 1
This product is not available
View detail list
06
Zwischengetriebewelle
Required quantity for your set: 1
This product is not available
View detail list
07
Zwischengetriebe 25
Required quantity for your set: 1
This product is not available
View detail list
08
Schraube für Spindelgetriebe
Required quantity for your set: 1
This product is not available
View detail list
09
Spindelgetriebe 25
Required quantity for your set: 1
This product is not available
View detail list
10
Hülse für Spindelgetriebe 25
Required quantity for your set: 1
This product is not available
View detail list
11
Hülse für Konusgetriebe 50
Required quantity for your set: 1
This product is not available
View detail list
12
Oberer Mittenkörper
Required quantity for your set: 1
This product is not available
View detail list
13
Schrauben für unt./oberen Körper (6pro Pkg.)
Required quantity for your set: 1
This product is not available
View detail list
14
Turbinen-Antriebsgetriebe 25
Required quantity for your set: 1
This product is not available
View detail list
15
Turbine 25
Required quantity for your set: 1
This product is not available
View detail list
16
Turbinenkasten mit Achse 25
Required quantity for your set: 1
This product is not available
View detail list
17
Antriebslager 2
Required quantity for your set: 1
This product is not available
View detail list
18
Getriebekasten
Required quantity for your set: 1
This product is not available
View detail list
19
Unt. mittlerer Körper
Required quantity for your set: 1
This product is not available
View detail list
20
Grundplatteneinheit
Required quantity for your set: 1
This product is not available
View detail list
21
Radkit (6 Räder, Achsen) 25
Required quantity for your set: 1
This product is not available
View detail list
23
Schraube für mittleren Körper
Required quantity for your set: 1
This product is not available
View detail list
24
Schraube für unteren Körper
Required quantity for your set: 1
This product is not available
View detail list
26
Klappe für Bodenreiniger
Required quantity for your set: 1
€15.90
27
Bauteilekit
Required quantity for your set: 1
This product is not available
View detail list
28
Baustein-Schraubenkit
Required quantity for your set: 1
This product is not available
View detail list
29
Bausteinbolzen (6 pro Pkg.)
Required quantity for your set: 1
This product is not available
View detail list
30
Flügelkit, weiß
Required quantity for your set: 1
€34.90
31
Schuhe für Bodenreiniger (4 Stk. Packung)
Required quantity for your set: 1
€17.90
32
Bodenplatte 25
Required quantity for your set: 1
This product is not available
View detail list
33
Düse
Required quantity for your set: 1
This product is not available
View detail list
02d
Kopfeinheit für Whaly inkl. Endstück
Required quantity for your set: 1
This product is not available
View detail list
02e
Endstückeinheit für Whaly
Required quantity for your set: 1
This product is not available
View detail list
03b
Schirm, weiss (nur Whaly)
Required quantity for your set: 1
This product is not available
View detail list
22b
Ring, weiß
Required quantity for your set: 1
This product is not available
View detail list

FAQs from category Pool robots:

The power cable gets tangled/twisted in the water, what can I do?

Do not leave the cable in the pool all the time. After each use, remove it from the pool and unplug and turn off the cord. Wash the cable with clean water to remove chemical residues after each cleaning operation. Put the cable length into the pool according to pool dimensions, place the remaining cable at the pool edge, i.e. pull overflown cable out of the water. Place obstacles such as built-in pool ladders/installation ladders out of the pool to prevent the cable from getting caught.

The pool vacuum does not reach all parts of the pool, what can I do?

Position the power supply so that the cleaner can easily reach all areas. Switch off the filter pump while cleaning with the pool vacuum. Enter the maximum possible length of the connection cable in the pool, but take into account a corresponding minimum distance between the control unit and the pool. Change the setting of the nozzles. 

The pool vacuum is not climbing the walls, what can I do?

Clean the filter container/filter bag and remove slippery debris such as algae from the pool walls. Put the pool vacuum cleaner into the pool at the optimum water temperature. This is between 10°C and 35°C. Check the drive belts and brushes for wear and replace them if necessary. Set the PH value correctly. This should be between 7.0 and 7.2. Switch off the unit and let all the air escape. Mount the additional buoyancy aids from the scope of delivery.

The cleaner shows no function, what can I do?

Check the plug of the power cord and the control unit or the battery. Plug the control unit directly into a socket and do not use extension cables. Check your house line for overload, the socket may be defective. Contact a qualified electrician.

The cleaner does not sink / emerges / turns in circles on the pool bottom, what can I do?

There is air in the pool vacuum, switch off the unit, let all the air escape and let the pool vacuum sink to the ground. If necessary, adjust the salt content correctly.

The cleaner does not move forward, what can I do?

Check the wheels/drive belts for wear and foreign objects in the drive. Replace the wheels/drive belts if necessary.

I have a salt water pool and the pool vacuum goes over the edge, what can I do?

Check whether the water level in the pool is too high and drain the water if necessary. If your pool liner is a little rough, the pool vacuum will have more grip. Carry out a reduction of the buoyancy. If you have a salt water pool, the buoyancy is slightly higher in salt water; reduce the buoyancy.

The pool vacuum cleaner only moves vertically in the pool, what can I do?

It is necessary to weigh down the pool vacuum cleaner. A weight must be installed for this purpose. Please contact our Service Centre.

I have a stainless steel or tiled pool

Our pool vacuums were designed for liner pools, the above materials have no grip or adhesion for the pool vacuum because the surfaces are too smooth.

What do I do if the INTEX automatic vacuum pool cleaner does not move or moves very slowly?

Pull the cleaning hose and lift the automatic vacuum pool cleaner from the pool floor. The pool floor may be wrinkled, preventing the vacuum cleaner from moving. Check the water flow and make sure that the filter pump is switched on and has the appropriate power. Make sure that the gate valves are open. Clean or change the filter cartridge. For sand filter systems, you must backwash the filter.

The device does not turn on the pool wall, what can I do?

You need to unblock or remove the cleaning lips because the sail, water outlet nozzle or cleaning lip may be stuck.

Important information

Symbolic photos - The pictures shown are for reference only, the actual product may vary.

Symbol photos

The pictures shown are just for reference, the actual product may differ.