INTEX Connector-Set Ø 38 mm 4 to 7.3 m³/h
- High quality plastic
- Chlorine and salt water resistant
- Easy to assemble
- Ø 38 mm hose connection
- For pumps with 4-7.3 m³/h flow rate
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
This connection set consists of two gate valves, a sealing cap, a water revitalisation nozzle set and a sieve grille. It is suitable for all INTEX pools with Ø 38 mm hose connection and a filter pump delivery rate of 4 to 7.3 m³/h. The set is chlorine and salt water resistant and made of high quality plastic. The assembly is very quick and easy, so that you can quickly put your pool system back into operation.
FAQs from category Filter system accessories:
All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.
All filter systems and filter pumps have a sound pressure level* of < 70 dB(A).
*The emission volume is comparable to a large household appliance.
If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.
If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.