INTEX INTEX

Auto Pool Cleaner - Floor cleaner for INTEX Pools only

128001
Art.
  • Powerful Venturi principle cleaner for INTEX pools only
  • Pool hose Ø 38 mm, length 750 cm
  • Suitable for salt water
  • Very effective and hassle-free

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€129.00
including 20% VAT
In stock
From € 40,- free shipping
Return free of charge

Product information

High performance floor vacuum for all INTEX pools Ø 38 mm screw connector and gate valve. Clean is carried out following the Venturi principle. Filter pump power of at least 5,678 l/h is required for optimal cleaning performance. The 750 cm long swimming pool hose (included in delivery) is connected directly onto the inlet (pressure side). The Auto Pool Cleaner from INTEX is also suitable for salt water.

Operating mode: External pump connection
Cleaning area: floor cleaning
Suitable for saltwater: yes
Water temperature: 10°C - 35°C
Ambient temperature: 10°C - 40°C
Flow rate external pump: 6.056 l/h - 13.248 l/h
Connection size: Ø 38 mm
 

01 Top part of cleaner, including wheels
€39.90
including 20% VAT, plus shipping costs
02 Screw fitting for top part
€2.49
including 20% VAT, plus shipping costs
03 Gear module
€28.90
including 20% VAT, plus shipping costs
04 Dirt net, as of 2014
€4.49
including 20% VAT, plus shipping costs
05 Bottom part of cleaner
€14.90
including 20% VAT, plus shipping costs
06 Micro screen
€2.99
including 20% VAT, plus shipping costs
07 Hose adapter
€2.99
including 20% VAT, plus shipping costs
08 Hose collar nut
€1.99
including 20% VAT, plus shipping costs
09 Hose
€37.90
including 20% VAT, plus shipping costs
10 Brush attachment A
€1.49
including 20% VAT, plus shipping costs
11 Brush, H=32 mm
€1.49
including 20% VAT, plus shipping costs
12 Brush attachment B
€1.49
including 20% VAT, plus shipping costs
13 Plastic washer, Ø 74 x 8 mm
€0.49
including 20% VAT, plus shipping costs
14 O-ring for plug seal
€0.49
including 20% VAT, plus shipping costs
Free shipping
01 Oberteil Bodensauger inkl. Räder
€55.90
including 20% VAT
02 Screw fitting for top part
€2.49
including 20% VAT, plus shipping costs
03 Getriebemodul 2013 NEU
€30.90
including 20% VAT, plus shipping costs
04 Dirt net, as of 2014
€4.49
including 20% VAT, plus shipping costs
05 Bottom part of cleaner
€14.90
including 20% VAT, plus shipping costs
06 Hose clamp from Ø 35 - Ø 51 mm
€4.49
including 20% VAT, plus shipping costs
07 Schlauchadapter
€2.49
including 20% VAT, plus shipping costs
08 Schlauch A
€10.90
including 20% VAT, plus shipping costs
09 Schlauch B
€15.90
including 20% VAT, plus shipping costs
10 Schlauch C
€16.90
including 20% VAT, plus shipping costs
11 Schlauch D
€23.90
including 20% VAT, plus shipping costs
12 Brush attachment A
€1.49
including 20% VAT, plus shipping costs
13 Brush, H=32 mm
€1.49
including 20% VAT, plus shipping costs
14 Brush attachment B
€1.49
including 20% VAT, plus shipping costs
15 Plastic washer, Ø 74 x 8 mm
€0.49
including 20% VAT, plus shipping costs

FAQs from category Pool robots:

Do not leave the cable in the pool all the time. After each use, remove it from the pool and unplug and turn off the cord. Wash the cable with clean water to remove chemical residues after each cleaning operation. Put the cable length into the pool according to pool dimensions, place the remaining cable at the pool edge, i.e. pull overflown cable out of the water. Place obstacles such as built-in pool ladders/installation ladders out of the pool to prevent the cable from getting caught.

Position the power supply so that the cleaner can easily reach all areas. Switch off the filter pump while cleaning with the pool vacuum. Enter the maximum possible length of the connection cable in the pool, but take into account a corresponding minimum distance between the control unit and the pool. Change the setting of the nozzles. 

Clean the filter container/filter bag and remove slippery debris such as algae from the pool walls. Put the pool vacuum cleaner into the pool at the optimum water temperature. This is between 10°C and 35°C. Check the drive belts and brushes for wear and replace them if necessary. Set the PH value correctly. This should be between 7.0 and 7.2. Switch off the unit and let all the air escape. Mount the additional buoyancy aids from the scope of delivery.

Check the plug of the power cord and the control unit or the battery. Plug the control unit directly into a socket and do not use extension cables. Check your house line for overload, the socket may be defective. Contact a qualified electrician.

There is air in the pool vacuum, switch off the unit, let all the air escape and let the pool vacuum sink to the ground. If necessary, adjust the salt content correctly.

Check the wheels/drive belts for wear and foreign objects in the drive. Replace the wheels/drive belts if necessary.

Check whether the water level in the pool is too high and drain the water if necessary. If your pool liner is a little rough, the pool vacuum will have more grip. Carry out a reduction of the buoyancy. If you have a salt water pool, the buoyancy is slightly higher in salt water; reduce the buoyancy.

It is necessary to weigh down the pool vacuum cleaner. A weight must be installed for this purpose. Please contact our Service Centre.

Our pool vacuums were designed for liner pools, the above materials have no grip or adhesion for the pool vacuum because the surfaces are too smooth.

Pull the cleaning hose and lift the automatic vacuum pool cleaner from the pool floor. The pool floor may be wrinkled, preventing the vacuum cleaner from moving. Check the water flow and make sure that the filter pump is switched on and has the appropriate power. Make sure that the gate valves are open. Clean or change the filter cartridge. For sand filter systems, you must backwash the filter.

You need to unblock or remove the cleaning lips because the sail, water outlet nozzle or cleaning lip may be stuck.

Important information

Only suitable for INTEX above ground pools with Ø 38 mm hose connection and gate valve. - Not suitable for built-in pools!

Symbol photos

The pictures shown are just for reference, the actual product may differ.