INTEX
Safety ladders for pools 122 cm
- Safety ladder made of coated steel frame
- Safety ladder with removable outer steps
- Steps with anti-slip surface
- Protective caps to prevent damage to the pool liner
- Easy to set up, dismantle and store
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Safety ladder with coated steel frame is used for pools with a height of 122 cm. The anti-slip surface on the steps ensure a comfortable usage of the ladder. The steps on the outside of the ladder can be opened with 2 folding clasps and the steps can be put up easily. Children are not able to climb into the pool. The maximum weight is 136 kg.
Number of steps: 3 steps + 1 platform
Ladder suitable for pool height: 122 cm
Load capacity: 136 kg
Dimension: 124 x 84 x 172 cm
Suitable for salt water: yes
FAQs from category Safety ladder:
Please remove the ladder after each use. An incorrectly adjusted pH value or too high a chlorine value can cause rust to form in a very short time. If you operate your pool with salt water, you will need a zinc plate, which is used for equipotential bonding for ladders in connection with salt water systems. Salt water and salt water vapours can otherwise cause the material to rust.
The maximum load weight must not be exceeded.
Stainless steel pool ladders are rustproof, but not rust-resistant. When using pool ladders in a salt water pool, a zinc plate should always be used. The zinc plate serves as potential equalisation for stainless steel ladders in connection with salt water disinfection. It prevents rusting and helps prevent corrosion of your stainless steel ladder.
Mounting the zinc plate (art. no. 018259): Screw the zinc plate to the outside of your stainless steel ladder. The installation must be done on the inside of the pool and below the water level. Make sure that the zinc plate is renewed every season.
If the zinc plate has already attracted a lot of rust particles, we recommend replacing it. It is recommended to replace the zinc plate every season.
An incorrectly adjusted pH value or too high a chlorine value can cause the rusting in a very short time.
