Cart Cart
Steinbach Steinbach

Pipes

404362
Art.
  • High quality plastic
  • Chlorine and salt water resistant

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Notifiy me:

€9.99
inclusive of VAT, plus shipping costs

Wall ducting for concrete - liner pools 2" outer thread x outer diameter 50, length 30 cm, made from ABS, suitable for inlet nozzles for above ground pools and concrete - liner pools

FAQs from category Pipes:

Can I glue a PVC adhesive hose into PCV piping parts?

Yes, but note that the hose must be cut straight, deburred and cleaned. In addition, more glue has to be applied. It is easier with the appropriate adapter screw connection. 

Can I glue a PVC pipe into a transition fitting?

This is not intended. There are sufficient possibilities to create transitions, the parts required for this are listed in our brochure ("Individual components Styrofoam pools").

How do I connect two INTEX floating hoses with 2" external thread?

It is best to use our 2" double nipples (art.no. 062085) - Please note that you also need flat gaskets for sealing (art.no. 0409331).

The connection hoses do not become tight (drip), what can I do?

This can sometimes happen due to production reasons; please refer to our notes in the operating instructions. Weak dripping is best eliminated by wrapping Teflon tape over the affected connections.

Why is it that the 3-way valve from the bypass set is very stiff when used for the first time?

This is due to the fact that the seals are lubricated inside with a lubricant - on the one hand for sealing and on the other hand so that the components can be adjusted more easily (plastic on plastic). After the first couple of turns, the lever will turn smoothly.

! Important information

Symbolic photos - The pictures shown are for reference only, the actual product may vary.