Easy Set Pools® with filter unit
- 3 ply SUPER-TOUGH® material
- Non-return air valve
- 2 way protected emptying valve
- Drainage connector
- Shut-off device for filter unit
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Experience cool refreshment on hot days, with a guaranteed fun factor for the whole family with this size Easy Set Pool from the world’s number 1 INTEX. Water capacity when filled to 80 % is , assembly time is only around . Stability and safety are guaranteed by the floor liner thickness , wall and air ring . The cartridge filter unit included as part of the scope of supply ensures optimal filtration .
Connection for filter unit
The pool comes with hose connectors Ø 32 mm for INTEX-filter units type ECO as standard. For trouble-free connection we recommend use of these filter pumps, as they have excellent filter performance aligned for this pool, and also the necessary connections. With other models, you must buy the required connector elements separately.
Closure cap for filter connector
- Do you want to run your pool without filter technology?
- Would you like to replace your filter cartridges?
- Is your filter pump being serviced?
Just use the connector cap which came with your basic equipment to block off the filter connection. Push it into the opening in the filter connection on the inner side of the pool liner to block. Quick, easy, efficient.
Pool form: round
Product dimension: Ø 305 x 76 cm
Product set-up dimensions: Ø 305 x 76 cm
Salt water suitable: yes
Operational area: Outdoor
Mounting options: freestanding
Water capacity: 3.853 l
Water filling height: 58 cm
Material outer lining: laminated PVC
Surface treatment: laminated PVC
Material inner lining: laminated PVC
Liner thickness bottom: 0,25 mm
Liner thickness wall: 0,50 mm
Color of inner liner: mosaic
Assembly min. number of persons: 2
Assembly time approx.: 10 min
Filter unit: Krystal Clear cartridge filter unit C330, Circulation capacity 1.136 l/h
Number of skimmers: no
Inlet nozzle: 1
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Above ground pools:
The ground should be firm and stable. The ground should not be slippery, otherwise there is a possibility that the frames may slip away from the pool.
No, they merely provide additional protection around the pool.
Yes, INTEX above ground pools can be operated with salt water. At the end of the season, clean the salt water system with clear tap water and allow the pool to dry completely.
Above ground pools are not frost-proof and therefore not winterproof. The pool sets should be stored dry at 5°+. Please make sure that the liners and poles are well dried out before storage to avoid mould and rust.
The pool must not be placed on uneven or sloping ground. The surface must be flat and level and free from branches, stones, sharp and pointed objects. The place must be stable and weight-resistant (not on a balcony or terrace). The above-ground pool must not be buried in the ground, not even partially. The best location is in a sunny position. Also remember to leave a safety distance of 1.5 - 2 meters around the pool! This serves, among other things, to protect children so that they cannot climb up anywhere and fall into the pool.
If the weld seam of a pool liner is coming apart, it is a manufacturing defect. In this case, the pool liner will be replaced within the warranty period. Please refer to the warranty information in the operating instructions and send your request to our help desk.