INTEX INTEX

Easy Set Pools® ECO connection without filter unit

Art.
  • 3 ply SUPER-TOUGH® material
  • Non-return air valve
  • 2 way protected emptying valve
  • Drainage connector
  • Shut-off device for filter unit

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

from €68.90
including VAT
The minimum order quantity is 1
From € 49,- free shipping
Return free of charge

Product information

Experience cool refreshment on hot days, with a guaranteed fun factor for the whole family with this size Easy Set Pool from the world’s number 1 INTEX. Water capacity when filled to 80 % is , assembly time is only around . Stability and safety are guaranteed by the floor liner thickness , wall and air ring . For optimal filtering (not included), we recommend exclusively INTEX filter units type ECO. Not only do these give you great filtration, they also have all the required connections.

TX-POOL-EASY_11.jpg

Connection for filter unit

The pool comes with hose connectors Ø 32 mm for INTEX-filter units type ECO as standard. For trouble-free connection we recommend use of these filter pumps, as they have excellent filter performance aligned for this pool, and also the necessary connections. With other models, you must buy the required connector elements separately.

TX-POOL-EASY_06.jpg

Closure cap for filter connector

  • Do you want to run your pool without filter technology?
  • Would you like to replace your filter cartridges?
  • Is your filter pump being serviced?

No problem!

Just use the connector cap which came with your basic equipment to block off the filter connection. Push it into the opening in the filter connection on the inner side of the pool liner to block. Quick, easy, efficient.

Pool form: round
Product dimension: Ø 366 x 76 cm
Product set-up dimensions: Ø 366 x 76 cm
Salt water suitable: yes
Operational area: Outdoor
Mounting options: freestanding
Water capacity: 5.621 l
Water filling height: 58 cm
Material outer lining: laminated PVC
Surface treatment: laminated PVC
Material inner lining: laminated PVC
Liner thickness bottom: 0,30 mm
Liner thickness wall: 0,5 mm
Color of inner liner: mosaic
Assembly min. number of persons: 2
Assembly time approx.: 10 min
Filter unit: no
Number of skimmers: no
Inlet nozzle: no
Hoses: no
Ladder: no
Pool cover: no
Floor protection cover: no
Cleaning kit: no

FAQs from category Above ground pools:

The ground should be firm and stable. The ground should not be slippery, otherwise there is a possibility that the frames may slip away from the pool.

No, they merely provide additional protection around the pool.

Yes, INTEX above ground pools can be operated with salt water. At the end of the season, clean the salt water system with clear tap water and allow the pool to dry completely.

Above ground pools are not frost-proof and therefore not winterproof. The pool sets should be stored dry at 5°+. Please make sure that the liners and poles are well dried out before storage to avoid mould and rust.

The pool must not be placed on uneven or sloping ground. The surface must be flat and level and free from branches, stones, sharp and pointed objects. The place must be stable and weight-resistant (not on a balcony or terrace). The above-ground pool must not be buried in the ground, not even partially. The best location is in a sunny position. Also remember to leave a safety distance of 1.5 - 2 meters around the pool! This serves, among other things, to protect children so that they cannot climb up anywhere and fall into the pool.

If the weld seam of a pool liner is coming apart, it is a manufacturing defect. In this case, the pool liner will be replaced within the warranty period. Please refer to the warranty information in the operating instructions and send your request to our help desk.

Accessories
Other customers also purchased

Important information

Important notes: This pool is not suitable for building into the ground. Assembly is easiest with two people. Approximate assembly time, depending on the equipment option and size, is about 15 minutes (without preparation work for sub-construction or filling). Watertightness/Class: W0. EN 16582-1 / EN 16582-3. Pool assembly requires an appropriately prepared setup site, which must be absolutely flat and even. The sub-surface must be solid enough to accommodate the weight of a filled pool regardless of the weather. In addition, leaking pool water must be able to flow off easily without causing any damage.

Caution

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Symbol photos

The pictures shown are just for reference, the actual product may differ.