Spare parts
Looking for the matching spare part?
Styrofoam pool complete set Type Classic de Luxe +
- Strong high frequency welded liner tank
- Aluminium hanging bracket
- Good sized filter unit with quartz filter sand
Description
The set contains:
- Styropor® stones Big Stone 125 x 25 x 50 cm (L x W x H)
- Floor insulation P 40
- Colour Blue 1,00 mm strong high frequency welded liner tank
- Δ Colour Sand 0,80 mm strong high frequency welded liner tank
- Roman steps, fibreglass reinforced plastic
- Aluminium hanging bracket
- Self-supporting special fleece
- The filter unit is perfectly matched to the pool size
- Quartz filter sand
- Wide neck built-in skimmer
- Inlet nozzles
- Wall ducting
- Pipe material
- Installation kit for counter current unit
Technical Information
Please note that the products shown represent the current scope of delivery, as of 2026.
Videos
Documents
Spareparts
Important Notices
This type of pool is only suitable for building into the ground. The specified dimensions are the inside dimensions = quantity of water. (Length x Width x Depth)
Outer dimensions = inside dimensions + 50 cm e.g. 600 x 300 Inside dimensions = 650 x 350 cm Outside dimensions. It is easiest to assemble with a minimum of two people. The effective water depth is -10 cm from the pool height. Watertightness/Class: W0. EN 16582-1 / EN 16582-3. Your local specialist can answer all your questions regarding installation requirements or building code regulations.
Attention
Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.
Additional Information
Product images are for reference only and may not be an exact representation of the product.