Steel wall pool set Grande round without filter unit
- Galvanised coated steel casing
- Particularly robust and strong construction
- Supports and floor rails out of metal
- Winter-proof liner 0.60 mm
- Skimmer and inlet nozzle
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
The steel wall pool set Grande you have the luxury version of steel wall pools. The dimensions are . This series impresses not only by the strong steel wall (approx.0.60 mm) and a height of 135 cm, but also with a winter-proof, strong inner liner ((approx. 0,60 mm). Dismanteling during the winter season is not necessary. An extra wide hand rail and solid lateral support structure provide a high level of security and years of enjoyment with this pool. With the inlet nozzle and skimmer set included, everything is already prepared for optimumcirculation. Both the swimming pool connection hoses and hose clamps are included in the set. Ground installation is free-standing, partially or completely possible. Please note the fitting instructions.
Pool Ø 366 x 135 cm
Water capacity: 12.800 l (Filling height 125 cm)
Robust, galvanised, plastic-coated steel casing (approx. 0,6 mm)
15 cm wide metal hand rail
Supports and floor rails out of metal
Winter-proof inner liner (approx 0,6 mm)
Skimmer and nozzle perforation
Integrated skimmer and pool inlet nozzle
Connection hoses and hose clamps
Teflon thread seal tape
Ground installation is free-standing, partially or completely possible.
FAQs from category Steel wall pools round:
It is essential to set up the pool when there is no wind, gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.