Steinbach
Steel wall pool set Highline without filter unit
- Robust, galvanised, plastic-coated steel casing (approx. 0.40 mm)
- Winter-proof inner liner (approx 0.40 mm)
- Integrated skimmer and pool inlet nozzle
- It can be completely or partially built into the ground. Please note the fitting instructions
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The Highline series is ideal for pool owners who love to dive deep. The water depth of approx. 120 cm is almost unbeatable. Also a highlight is the solid construction of the Highline series with its extra wide handrail and strong retaining structure. A strong steel wall (approx. 0.40 mm) and the winter-proof inner liner (approx. 0.40 mm) allow the use all year-round. Dismanteling the pool during the winter season is not necessary. The set includes inlet nozzles, skimmer set, swimming pool connection hoses and hose clamps to ensure optimum circulation. It is also supplied with an access ladder. We advise using the *Steinbach filter unit Comfort 50 (*not included) to ensure optimum circulation and crystal clear water. The included ladder provides a comfortable entry and exit.
Pool Ø 550 x 132 cm
Water capacity: 28.500 l (Filling height 122 cm)
Robust, galvanised and plastic-coated steel casing (approx. 0,4 mm)
15 cm wide metal handrail
Metal supports
Floor rails
Winter-proof inner liner (approx. 0,4 mm)
Skimmer and nozzle perforation
Integrated skimmer and pool inlet nozzle
Connecting hoses and hose clamps
no
Standard ladder (unsecured access equipment)
Teflon thread seal tape
It can be completely or partially built into the ground.
FAQs from category Steel wall pools round:
It is essential to set up the pool when there is no wind, gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.
