Steel wall pool set Highline without filter unit
- Galvanized, coated steel jacket
- winterproof inner foil
- built-in skimmer and pool inlet nozzle
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
The "Highline" series is suitable for pool owners who want to really dive once. A water depth of approx. 120 cm is an unbeatable argument for this. In addition, the solid construction of the "Highline" series: the extra wide handrail and the stable support construction. Both the strong steel wall and the winterproof inner liner allow year-round use. This pool does not need to be dismantled during the winter months. In preparation for optimal circulation, the set already includes inlet jets, skimmer set, pool connection hoses and hose clamps. An access ladder is also included in the delivery. For optimal circulation and thus crystal clear water, we recommend, depending on the pool size, the use of the filter systems type Comfort. The included ladder offers you a comfortable entry and exit.
Pool form: round
Product dimension: Ø 550 x 132 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation, part installation, freestanding
Water capacity: 28.500 l
Water filling height: 122 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Liner thickness bottom: 0,40 mm
Liner thickness wall: 0,40 mm
Color of inner liner: blue
Assembly min. number of persons: 2 - 4
Assembly time approx.: 300 - 480 min
Filter unit: no
Number of skimmers: yes
Inlet nozzle: 1
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Steel wall pools round:
It is essential to set up the pool when there is no wind, gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.