Steinbach
Steel wall pool set Nuovo without filter unit
- Robust, coated steel shell
- Plastic handrail and rails
- Winter-proof inner foil (approx. 0.4 mm)
- Built-in skimmer and pool inlet nozzle
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Steel wall pools of the "Nuovo" series are easy and quick to assemble. Not only the strong steel wall, but also the winter-proof inner foil enable year-round use. Dismantling in winter is not necessary. With the inlet nozzle and skimmer set included in the scope of delivery, everything is already prepared for optimal circulation. Both swimming pool connection hoses and hose clamps are included in the set. An included ladder offers you a comfortable way to get in and out.
As an option, we recommend the powerful *Steinbach Comfort 50 filter system (*not included), which ensures crystal-clear pool water.
Pool shape: round
Product dimension: Ø 550 x 120 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation, part installation, freestanding
Water capacity: 25.600 l
Water filling height: 110 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Liner thickness bottom: 0,40 mm
Liner thickness wall: 0,40 mm
Color of inner liner: blue
Assembly min. number of persons: 2 - 4
Assembly time approx.: 180 - 300 min
Filter unit: no
Number of skimmers: yes
Inlet nozzle: 1
Hoses: yes
Ladder: yes
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Steel wall pools round:
It is essential to set up the pool when there is no wind, gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.
