Cart Cart
Steinbach Steinbach

Steel wall pool Styria round without accessories

  • Galvanised coated steel casing
  • Particularly robust and strong construction
  • Hand rail and floor rails out of plastic
  • Winterproof liner in adria blue: approx. 0.60 mm and liner colour in sand: approx. 0.80 mm
  • Skimmer and nozzle perforation
As low as €749.00
Steel wall pool Styria round without accessories, pool, hanging meadow, steel casing, handrail, floor rails, foil blue 0.60 mm

Product description

The steel wall pools of the "Styria" series are the most robust and strongest pools in this class. Not only the strong steel wall (approx. 0.80 mm at a depth of 150 cm), but also the winter-proof inner liner (liner colour adria blue: approx. 0.60 mm and liner colour sand: approx. 0.80 mm) allow year-round use. Disassembly in winter is not necessary. Punched holes for skimmer and inlet nozzle are already available. The "Styria" series round is suitable for partial or complete underground installation (only with pressure protection). The *Skimmer set S1 (*not included) is the optimal preparation for circulating your pool water. For the "Styria" series round up to Ø 460 x 120 cm we recommend the *Steinbach filter unit Classic 250N or the *Steinbach filter unit Active Balls+ (*not included). For the steel wall pool of the "Styria" series round with Ø 500 x 120 cm, 
Ø 600 x 120 cm and Ø 500 x 150 cm we recommend the *Steinbach filter unit Classic 400 (*not included). For pool dimensions of Ø 600 x 150 cm we recommend the *Filter unit Compact 8 (*not included). These Steinbach filter units are optimally adjusted to the respective steel wall pools of the "Styria" series in round and they ensure crystal clear pool water.


The set contains:

  • Pool
  • Water capacity: approx. (Filling height )
  • Robust, galvanised coated steel casing (approx 0.60 mm up to 1.20 m depth, 0.80 mm at 1.50 m depth)
  • Interlocking steel wall connection
  • Hand rail and floor rails out of Plastic
  • Skimmer and nozzle perforation
  • Winterproof liner in adria blue: approx. 0.60 mm and liner colour in sand: approx. 0.80 mm

Pools 1.50 m deep must, however, be built in to a depth of at least 60 cm !

Important information

Important notes: Please note that this pool type requires the construction of a coving, this can be done with polystyrene wedges or with sand. Please refer to the instructions for a detailed description of the fillet. This pool type is suitable for installation on a paved surface. It must be stable enough to withstand the weight of a filled pool regardless of the weather. In addition, the possibility must be created that leaking pool water can drain without causing damage. The installation in the ground (only with pressure protection) is possible partially or completely. Please note that for underground installation the pool wall must be statically protected against earth pressure. It is easiest to install the pool with at least three people. The approximate installation time is about 3 hours, depending on the equipment variant and size (without preparatory work for substructure or filling). The effective water depth is -10 cm from the steel casing height. Watertightness / class: W0. EN 16582-1 / EN 16582-3. Due to the complexity of the product, please download the operating instructions. ATTENTION! Steel wall pools are not suitable for salt water! All important questions, such as installation requirements or legal building requirements, will be answered by your local specialist.Symbolic photos - The pictures shown are for reference only, the actual product may vary.


Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.