
Steel wall pool set Nuovo de Luxe oval without filter unit
- Robust, galvanised, plastic-coated steel casing (approx. 0.40 mm)
- Solid metal strut frame on the sides
- Winter-proof inner liner (approx 0.40 mm)
- Integrated skimmer and pool inlet nozzle
- It can be completely or partially built into the ground. Please note the fitting instructions
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Product information
The steel wall pool of the Nuovo de Luxe oval series is quick and easy to assemble. It can be used all year-round due to its strong steel wall (approx. 0.40 mm), and its winter-proof inner liner (approx. 0.40 mm). It does not need to be dismanteled during the winter season. The extra wide hand rail and solid side supporting frame provide a high level of safety and years of pleasure with this pool. Everything is ready for perfect cleaning and circulation with the inlet nozzles and skimmer set included. Both the swimming pool connection hoses and hose clamps for a filter unit are included in the set. The included ladder makes it easy to get in and out. The pools of this series are suitable for freestanding build-up and for partial or complete underground installation (only with pressure protection).
Pool 640 x 366 x 120 cm
Water capacity: 21.900 l (Filling height 110 cm)
Robust, galvanised, plastic-coated steel casing (approx. 0,4 mm)
15 cm wide metal hand rail
Metal supports
Plastic and metal floor rails
Solid metal strut frame on the sides
Winter-proof inner liner (approx. 0,4 mm)
Skimmer and nozzle perforation
Integrated skimmer and pool inlet nozzle
Connection hoses and hose clamps
Ladder
Teflon thread seal tape
Installation options: Erdeinbau, Teileinbau, freistehend



FAQs from category Steel wall pools oval:
It is essential to set up the pool when there is no wind, gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.
<