Styria pool oval 737 x 360 x 120 cm

  • Robust, galvanised coated steel casing (approx 0.60 mm up to 1.20 m depth, 0.80 mm at 1.50 m depth)
  • Hand rail and floor rails out of plastic
  • Winterproof liner in adria blue: approx. 0.60 mm
  • Interlocking steel wall connection
  • Skimmer and nozzle perforation
€99,999.99

Description

The steel wall pools of the "Styria" series are the most robust and strongest pools in this class. Not only the strong steel wall (approx. 0.80 mm at a depth of 150 cm), but also the winter-proof inner liner (liner colour adria blue: approx. 0.60 mm and liner colour sand: approx. 0.80 mm) allow year-round use. Disassembly in winter is not necessary. Punched holes for skimmer and inlet nozzle are already available. The "Styria" series in oval is only suitable for underground installation. A foundation plate and retaining walls on the long sides are required.
The *Skimmer set S1 is the optimal preparation for the circulation of your pool water. For the "Styria" series in oval with the pool size of 490 x 300 x 120 cm we recommend the *Steinbach filter unit Classic 250N or the *Steinbach filter unit Active Balls+.  For all steel wall pools of the "Styria" Series in oval with a pool height of 150 cm and the pool size 800 x 400 x 120 we recommend the *Steinbach filter unit Compact 8. These Steinbach filter units are perfectly matched to the "Styria" series in oval and ensure crystal-clear pool water.
(* not included in delivery)

Technical Information

Basin shape
oval
Dimension
737 x 360 x 120 cm
Suitable for salt water
no
Area of application
Outdoor
Einbaumöglichkeit
ground installation
Water capacity
25.700 l
Water fill level
110 cm
Assembly time approx.
420 - 540 min
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness: 0,60 mm
Colour of the inner liner: adriatic blue
Assembly min. number of persons: 2 - 4
Filter system: no
Skimmer: no
Inlet nozzle: no
Hoses: no
Ladder: no
Pool cover: no
Floor protection cover: no
Article number: 012355

Please note that the products shown represent the current scope of delivery, as of 2026.

Videos

Documents

Spareparts

Looking for the matching spare part?

Important Notices

Important Information: The scope of delivery of the item does not include all the material required for assembly and operation.
Depending on the type of construction or the item in question, the following may be required for assembly: leveling material sand/split, floor insulation, cove (Styrofoam wedges item no. 016041), etc.
A filtration system and water treatment chemicals are required for operation. A heat pump or a solar collector for heating increases comfort. You can find more detailed information in the respective operating instructions, on our YouTube channel or in our online shop: https://www.steinbach-group.com/en/, https://www.youtube.com/@Steinbachgroup
This pool is only suitable for complete in-ground installation. A freestanding or partial in-ground installation is not possible. Note that in the case of complete in-ground installation the pool wall must be statically protected against earth pressure. Please refer to the operating instructions for details on how to do this.
In order to be able to set up the pool as quickly as possible, we recommend three persons if possible. The assembly time depends on the number and qualification of the people involved. PLEASE NOTE: Steel wall pools are not suitable for saltwater use due to the risk of rusting.

Attention

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Additional Information

Product images are for reference only and may not be an exact representation of the product.