Above ground pools

The ground should be firm and stable. The ground should not be slippery, otherwise there is a possibility that the frames may slip away from the pool.

No, they merely provide additional protection around the pool.

Yes, INTEX above ground pools can be operated with salt water. At the end of the season, clean the salt water system with clear tap water and allow the pool to dry completely.

Above ground pools are not frost-proof and therefore not winterproof. The pool sets should be stored dry at 5°+. Please make sure that the liners and poles are well dried out before storage to avoid mould and rust.

The pool must not be placed on uneven or sloping ground. The surface must be flat and level and free from branches, stones, sharp and pointed objects. The place must be stable and weight-resistant (not on a balcony or terrace). The above-ground pool must not be buried in the ground, not even partially. The best location is in a sunny position. Also remember to leave a safety distance of 1.5 - 2 meters around the pool! This serves, among other things, to protect children so that they cannot climb up anywhere and fall into the pool.

If the weld seam of a pool liner is coming apart, it is a manufacturing defect. In this case, the pool liner will be replaced within the warranty period. Please refer to the warranty information in the operating instructions and send your request to our help desk.