Pool liners for steel wall pools

There are two different types of round and oval pool liners in the product range of Steinbach: the overlapping pool liner and the pool liner with hanging edge. Using the hanging edge - also called wedge piping - the pool liner is fixed at the steel sheathing below the handrail. Overlapping liners can be fixed with an adhesive styrofoam wedge or a plastic strip. The styrofoam wedge is fixed with a special glue at the inside of the steel wall pool. If you do it by yourself, note, that there are no wrinkles at the inside of the liner. The handrail fixes the inner liner.

Items 1-11 of 12

Set Ascending Direction
List Grid
  1. €7.99
    including VAT, plus shipping costs
    Add to Wish List
  2. €7.99
    including VAT, plus shipping costs
    Add to Wish List
  3. Free shipping
    from €549.00
    including VAT
    Add to Wish List
  4. Free shipping
    from €359.00
    including VAT
    Add to Wish List
  5. Free shipping
    from €109.00
    including VAT
    Add to Wish List
  6. Free shipping
    from €399.00
    including VAT
    Add to Wish List
  7. Free shipping
    from €799.00
    including VAT
    Add to Wish List
  8. Free shipping
    from €1,090.00
    including VAT
    Add to Wish List
  9. Free shipping
    from €969.00
    including VAT
    Add to Wish List
  10. from €579.00
    including VAT
    Details
    Add to Wish List
  11. from €789.00
    including VAT
    Details
    Add to Wish List
Page
per page

Frequently asked questions for Steel wall pool liners:

Due to the material of the pool liner, it is not possible for holes or cracks to occur in the pool liner without outside interference.

Possible causes are:

  • Incorrect storage, e.g. below the minimum temperature of 5 °C specified in the operating instructions.
  • Incorrect use of pool chemistry (incorrect dosage, etc.)
  • Use of chemistry that is not suitable for pool operation
  • Insufficient cleaning after dismantling - residues on the pool liner start to react and attack the material
  • Holes can also be caused by animals (cats, birds, rodents, etc.)

Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.

So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.

Laying the pool liners

An aluminium suspension profile is suitable for fixing the wedge piping to Styrofoam pools. The rod offered by Steinbach is 200 cm long and anodised. Anodised means that the aluminium suspension profile has a protective layer of oxides that protects the rod from corrosion.

The Pool Coping plastic bar with a length of 100 cm is suitable for fixing overlapping foils in steel wall pools. It is resistant to chlorinated water, has good clamping properties and is made of high-quality plastic.

Styrofoam® wedges are suitable for use as a cove when laying an overlapping foil. They are glued directly to the steel wall on the inside with a special adhesive. For example, the Styrofoam® contact adhesive from Pattex is suitable for bonding the Styrofoam® wedges. This is a special adhesive for attaching Styrofoam® wedges (cove) to the inside of steel wall pools.

Winter-proof pool liners, which means a vinyl thickness of 0.40 mm or more, protect the steel shell pool from external influences and potential damage and enable the pool not to have to be dismantled during the winter months.

Round liner for steel wall pools

Round liner for all common pools with overlapping design in the colour blue is available from Steinbach with a diameter of 350 cm, 360 cm and 460 cm at a height of 90 cm or 110 cm with a thickness of 0.22 mm, 0.30 mm, 0.40 mm and 0.60 mm.

Overview of diameter x height and thickness of the pool liner:

  • 3,60 x 0,90 m - thickness 0,22 mm
  • 3,60 x 0,90 m - thickness 0,4 mm
  • 4,60 x 1,10 m - thickness 0,22 mm
  • 3,50 x 0,90 m - thickness 0,3 mm
  • 3,60 x 0,90 m - thickness 0,6 mm

Round liners for steel shell pools with a depth of 120 cm in a version with hook-in piping in the colour blue are available fromSteinbach with the diameter from 350 cm to 600 cm with a thickness of 0.60 mm. Please note the respective intermediate steps in the diameter.

Overview diameter x height and thickness of the inner foil:

  • 3,50 x 1,20 m - thickness 0,6 mm 

  • 3,60 x 1,20 m - thickness 0,6 mm 

  • 4,00 x 1,20 m - thickness 0,6 mm 

  • 4,20 x 1,20 m - thickness 0,6 mm 

  • 4,50 x 1,20 m - thickness 0,6 mm 

  • 4,60 x 1,20 m - thickness 0,6 mm 

  • 5,00 x 1,20 m - thickness 0,6 mm 

  • 5,50 x 1,20 m - thickness 0,6 mm 

  • 6,00 x 1,20 m - thickness 0,6 mm

Round liners for steel wall pools up to a depth of 135 cm in overlapping design in the colour blue are available from Steinbach with diameters from 366 cm to 732 cm with a thickness of 0.60 mm. Please note the different sizes in diameter.

Overview diameter x height and thickness of the round liner:

  • 3,66 x 1,50 m - thickness 0,6 mm 

  • 4,57 x 1,50 m - thickness 0,6 mm 

  • 5,49 x 1,50 m - thickness 0,6 mm 

  • 6,40 x 1,50 m - thickness 0,6 mm 

  • 7,32 x 1,50 m - thickness 0,6 mm 


For round pools with steel shell pools with a depth of 150 cm and a diameter of 500 cm or 600 cmm, you will find swimming pool liners from Steinbach in a version with hook-in piping in the colour blue with a thickness of 0.60 mm.

Overview diameter x height and thickness of the pool liner:

  • 5,00 x 1,50 m - thickness 0,6 mm
  • 6,00 x 1,50 m - thickness 0,6 mm

Oval liner for steel wall pools

Pool liners for oval steel shell pools with a depth of 120 cm in a version with hook-in piping in the colour blue are available fromSteinbach with a length of 490 cm to 800 cm and a width of 300 cm to 400 cm with a thickness of 0.60 mm. Please note the intermediate levels in length and width.

Overview length x width x height and thickness of the inner foil:

  • 4,90 x 3,00 x 1,20 m - thickness 0,6 mm
  • 6,25 x 3,60 x 1,20 m - thickness 0,6 mm
  • 7,37 x 3,60 x 1,20 m - thickness 0,6 mm
  • 8,00 x 4,00 x 1,20 m - thickness 0,6 mm

Oval liners for steel wall pools with a depth of up to 135 cm with overlapping design in the colour blue are available from Steinbach with a length of 549 cm, 610 cm and 732 cm with a width of 366 cm with a thickness of 0.60 mm.

Overview length x width x height and thickness of the oval liner:

  • 5,49 x 3,66 x 1,50 m - thickness 0,6 mm
  • 6,10 x 3,66 x 1,50 m - thickness 0,6 mm
  • 7,32 x 3,66 x 1,50 m - thickness 0,6 mm

For oval pools with steel shells with a depth of 150 cm and a length of 625 cm, 737 cm and 800 cm with a width of 360 cm and 400 cm, you will find pool liners with a version with hook-in piping in the colour blue with a thickness of 0.60 mm at Steinbach.

Overview length x width x height and thickness of the pool liner:

  • 6,25 x 3,60 x 1,50 m - thickness 0,6 mm
  • 7,37 x 3,60 x 1,50 m - thickness 0,6 mm
  • 8,00 x 4,00 x 1,50 m - thickness 0,6 mm