Steinbach
Oval liner for pools 120 cm deep, suspended blue profile
- Special covers for swimming pools
- Winter-proof
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Oval liners for steel wall pools with a depth of 120 cm in a version with suspended profile in the colour blue are available from Steinbach with a length of 490 cm to 800 cm with a thickness of 0.60 mm. Please note the respective intermediate steps in the diameter. The Steinbach oval liners have a UV-stable swimming pool inner liner and are winter-proof.
UV-resistant: yes
Pool form: oval
Dimension: 800 x 400 x 120 cm
Liner thickness: 0,60 mm
Liner construction: suspended profile
Material: vinyl
Entrance option: n.r.
Salt water suitable: yes
FAQs from category Steel wall pool liners:
Depending on the material, the pool must be set up at outside temperatures of 15 ° C to a maximum of 25 ° C, as the material can contract or expand. Steel wall pools with overlapping sheeting require a cove. Styrofoam wedges have to be glued to the inside of the steel wall between the wall and the bottom.
Due to the material of the pool liner, it is not possible for holes or cracks to occur in the pool liner without outside interference.
Possible causes are:
- Incorrect storage, e.g. below the minimum temperature of 5 °C specified in the operating instructions.
- Incorrect use of pool chemistry (incorrect dosage, etc.)
- Use of chemistry that is not suitable for pool operation
- Insufficient cleaning after dismantling - residues on the pool liner start to react and attack the material
- Holes can also be caused by animals (cats, birds, rodents, etc.)
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.