Steinbach Steinbach

Solar cover reels plastic for pools up to 5 m wide

036085
Art.
  • UV resistant plastic bearing blocks, plastic hand wheel
  • Extendible aluminium shaft for pools up to 5 m width

 

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€179.00
including VAT
In stock

Product information

Rewinding unit for solar covers with fixing assembly out of plastic. For pools up to 5 m width.

  • Plastic bearing blocks, plastic hand wheel
  • Extendible aluminium shaft
  • For pools up to 5 m width
  • Incl. fixing kit for all solar covers
  • For fixed mounting

Dimension: 323 x 41 x 46 cm

Please be aware that the shown product contain only the current scope of delivery, based on 2024.

FAQs for Solar cover reels plastic for pools up to 5 m wide:

With the straps and plastic plates included in the scope of delivery, the solar cover is directly connected to the retractor. This allows any type of solar cover to be attached. The solar tarp can be reinforced on the fastening side, but this is not mandatory. The distance between the straps and the retractor must be long enough for the solar cover to lie completely on the water surface when unrolled.

With this solar cover reel, the solar cover is connected to the aluminum shaft using rubber bands. For this to work, the solar cover must have eyelets on one narrow side. If this is not the case, it can be retrofitted with plastic eyelets at any time. There are plastic eyelets in the well-stocked hardware store. A connection without plastic eyelets is not possible, otherwise the solar cover will tear open.

FAQs from category Solar covers:

With the straps and plastic plates included in the scope of delivery, the solar cover is directly connected to the retractor. This allows any type of solar cover to be attached. The solar tarp can be reinforced on the fastening side, but this is not mandatory. The distance between the straps and the retractor must be long enough for the solar cover to lie completely on the water surface when unrolled.

With this solar cover reel, the solar cover is connected to the aluminum shaft using rubber bands. For this to work, the solar cover must have eyelets on one narrow side. If this is not the case, it can be retrofitted with plastic eyelets at any time. There are plastic eyelets in the well-stocked hardware store. A connection without plastic eyelets is not possible, otherwise the solar cover will tear open.

No, the manufacturing dimension can deviate due to the material, ambient temperature, etc.

The side with the air knobs must be on the surface of the water.

The small holes in the centre of the solar cover are for safety (same concept as the pool cover). In addition, small holes are distributed near the edge of the solar cover. Sometimes you may notice that the holes are not evenly spread. This will not affect the efficiency or life of your solar cover.

A 305 cm solar cover fits a 305 cm Frame Pool or Easy Pool; however, this does not mean that the solar cover has a diameter of 305 cm. Please bear in mind that there are two different values for the dimensions of solar covers.

No, due to the sun's rays and the lack of cooling by the water, the air knobs can burst.

In connection with this roll-up device, eyelets must be placed in the solar cover. These eyelets should always be mounted on the short side. E.g. for a solar tarp for an 8 x 4 m pool, the eyelets are mounted on the 4 m side.

Symbol photos

The pictures shown are just for reference, the actual product may differ.