Filter pump SPS 175-1T

  • Powerful filter pump
  • High-quality plastic
  • Self-priming pump with pre-filter
  • Integrated timer
Notify me when this product is in stock
€289.00

Description

Pool pumps are the powerhouse of the pool circuit. The Filter pump SPS 175-1T has a pump capacity of 20.040 l/h. The connection is 220-240V~ / 50Hz / 900 W. This filter pump can be used for pools with approx. 61.000 l water capacity. The hose connection is Ø 50 mm. The pump can be used up to a water temperature of 10°C.

 

Technical Information

Water capacity
61.000 l
Pump capacity
20.040 l/h
Power supply
220-240V~ / 50Hz
Input power maximum
900 W
Connection size
Ø 50 mm
Function principle
self-priming
Head
15,00 m
Pre-filter
yes
Timer present
yes
Suitable for salt water: yes
Trafo inkludiert: no
Schalldruckpegel: 70 dB(A)
Safety class: IPX5
Protection class: I
Isolierstoffklasse: F
Cable length to unit: 1,60 m
Water temperature: 10°C
Article number: 040090

Please note that the products shown represent the current scope of delivery, as of 2026.

Videos

FAQ

Set the timer on the filter pump to 24 hours. The filter pump is started and stopped with the external timer.
Make sure that you have previously activated the memory backup function of the timer. The following steps must be observed:

  1. Make sure that the power cable of the pump is disconnected from the power supply. 
  2. Use a PH1 Phillips screwdriver to remove the screws from the timer cover and remove the cover. 
  3. Pull out the plastic strip that can be seen underneath the battery. 
  4. Screw the cover back on again. The timer's memory backup function is now activated. 

The memory backup function draws the required energy from the pump battery when the mains supply is switched off. Please note that the battery life - depending on the daily operating time - may be limited to a few weeks.

Documents

Manual 040090_ID451_01_31102022_v01.pdf 040090_ID304_01_22042025.pdf

Spareparts

Looking for the matching spare part?

This way

Additional Information

Product images are for reference only and may not be an exact representation of the product.