Steinbach
Filter pump SPS 100-1 T
- Powerful filter pump
- High-quality plastic
- Self-priming pump with pre-filter
- Integrated timer switch
- Connector Ø 32/38 mm
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Pool pumps are the powerhouse of the pool circuit. The Filter pump SPS 100-1 T has a pump capacity of 9.400 l/h. The connection is 220-240V~ / 50Hz / 550 W . This filter pump can be used for pools with approx. 40.000 l water capacity. The hose connection is Ø 32/38 mm. The pump can be used up to a maximum water temperature of 35 °C.
Transparenter Vorfilterdeckel
49
Salt water suitable: yes
Water capacity: 40.000 l
Pump power: 9.400 l/h
Power supply: 220-240V~ / 50Hz
Input power maximum: 550 W
Transformer: no
Delivery head: 10,00 m
Operating principle: self-priming
Pre-filter: yes
Timer present: yes
Connection size: Ø 32/38 mm
*Sound pressure level: < 70 dB(A)
Protection class: IPX5
Insulation class: F
Cable length to unit: 1,60 m
Water temperature: 10°C - 35°C
*Emission sound level comparable to a large household appliance
FAQs for Filter pump SPS 100-1 T:
Set the timer on the filter pump to 24 hours. The filter pump is started and stopped with the external timer.
Make sure that you have previously activated the memory backup function of the timer. The following steps must be observed:
- Make sure that the power cable of the pump is disconnected from the power supply.
- Use a PH1 Phillips screwdriver to remove the screws from the timer cover and remove the cover.
- Pull out the plastic strip that can be seen underneath the battery.
- Screw the cover back on again. The timer's memory backup function is now activated.