Steinbach Steinbach

Solar shower Split

049085
Art.
  • Space-saving, easy transport thanks to the handy packaging dimensions
  • Quick & easy  installation and disassembly
  • Over 32 l capacity
  • Modern, timeless design
  • Available mid September

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€389.00
incl. VAT, Free shipping
In stock

Accessories
Other customers also purchased

Product information

The simplest and most effective solution to obtain hot water using solar energy! The 23 x 48,70 x 218 cm Solar shower Split has a 32 l plastic tank, a cold-hot water rotary valve and a split construction for space-saving storage. The maximum operating pressure is 5 bar, a connection for the garden hose is standard. The stand base has a dimension of 23 x 23 cm

Dimension: 23 x 48,70 x 218 cm
Capacity: 32 l
Max. working pressure: 5 bar
Base dimension: 23 x 23 cm
Divisible for space saving storage
Dimensions packaging: 134,00 x 42,50 x 24,50 cm

01 Seal 19x3 mm (049080/85)
€0.99
incl. VAT, excl. shipping
02 Shower head connection (049085)
€7.49
incl. VAT, excl. shipping
03 Shower head for 049085
€29.90
incl. VAT, excl. shipping
04 Hose adapter
€2.99
incl. VAT, excl. shipping
05 Entleerungskappe
€18.90
incl. VAT, excl. shipping
08 Faucet (049080/85)
€16.90
incl. VAT, excl. shipping
€2.49
incl. VAT, excl. shipping
01 Seal 19x3 mm (049080/85)
€0.99
incl. VAT, excl. shipping
02 Shower head connection (049085)
€7.49
incl. VAT, excl. shipping
03 Shower head for 049085
€29.90
incl. VAT, excl. shipping
05 Entleerungskappe
€18.90
incl. VAT, excl. shipping
08 Faucet (049080/85)
€16.90
incl. VAT, excl. shipping
09 Mixing faucet (049080/85)
€7.99
incl. VAT, excl. shipping
€2.49
incl. VAT, excl. shipping
01 Seal 19x3 mm (049080/85)
€0.99
incl. VAT, excl. shipping
02 Shower head connection (049085)
€7.49
incl. VAT, excl. shipping
03 Shower head for 049085
€29.90
incl. VAT, excl. shipping
04 Faucet (049080/85)
€16.90
incl. VAT, excl. shipping
05 Mixing faucet (049080/85)
€7.99
incl. VAT, excl. shipping
07 Assembly set
€2.49
incl. VAT, excl. shipping
10 Outlet valve (049085)
€5.49
incl. VAT, excl. shipping

FAQs from category Solar showers plastic:

Try to seal the connections with Teflon tape.

The connections will be damaged if tools are used, so please assemble the parts hand tight. The screw connection is already tight before it is completely screwed in. This allows
correct positioning, so that the shower head points downwards. If screw connections are not tight or the position is not correct, wrap the thread with Teflon tape.

The entire body of the shower is filled with water and works similarly to an electric boiler, where the heated water also collects at the top. When hot water is needed, cold water is let in by operating the faucet at the bottom of the tank, and the hot water already heated in the upper part is pressed out of the tank. After closing the faucet, the water from the shower head is still running. This circumstance is due to the heating of the water in the unpressurized tank and causes the dripping of the shower head. This is not a defect! A 3-4 minute after-dripping is therefore possible. If your shower drips longer or more strongly, please contact our helpdesk.

No, the shower is not frost-proof. Please disassemble the shower and remove all water from the pipes and the tank as soon as the outside temperature drops below 10 ° C. The shower must be stored in a dry, frost-proof room.

Symbol photos

The pictures shown are just for reference, the actual product may differ.