Steinbach
Quicktest strips for salinity
- Pack of 20 test strips
- Fast and accurate measurement of salt content
- Simply dip in and compare with color chart
- Ideal for saltwater pools and whirlpools
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
20 pcs. test strips for fast and accurate measurement of salinity in your pool.
Application Quicktest strips for salt content
Remove water from the pool using a clean container. The container should be about 1 cm full of water. Leave the test strip in the water for 4 minutes. After the 4 minutes, compare the result on the test strips with the scale printed on the packaging to determine the salt content of the pool.
FAQs from category Dosing aids:
The error code “Err1” means that the scale needs to be recalibrated.
This is how calibration works:
- Press and hold the g and M buttons simultaneously, then also press and hold the On/Off button.
- As soon as a row of numbers appears on the display, release all buttons.
- Press the M button.
- When “500” is displayed, place a calibration weight of 500 g on the scale.
- Calibration is complete as soon as “pass” is displayed.
If you put the chlorine tablets directly into the water, the chlorine will attack the liner, discolouring it and making it brittle. Irreversible damage not covered by any warranty may occur. All our dosing floats have an adjustment ring - to adjust the release to the pool water. Alternatively, you can also put the tablets into the skimmer.