Winter care product liquid

Art.
  • Prevents strong adhesion of limescale and dirt deposits
  • Prevents algal growth out of the bathing season
  • Concentrated agent with long-term effect
  • Facilitates using your pool in spring

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

from €10.90
incl. VAT, excl. shipping
Only %1 left
The minimum order quantity is 1

Product information

Overwintering concentrate - foam-free


Winter care product liquid, l, UN3082, Aquatic Acute 1, Aquatic Chronic 2

USAGE: Water care product for algae growth prevention. The use of the liquid winter care product facilitates using your pool in spring. It prevents strong adhesion of limescale and dirt deposits as well as algal growth.

For private swimming pools only.


DOSAGE: Before adding Winter care product liquid, adjust pH-value to the optimal range of 7.0 - 7.4. Before the bathing season ends and the regular water care is intermitted, turn off the filter system, add Winter care product liquid to the water in various quarters onetime, dilute 1:5 if necessary, to ensure even distribution. Depending on the water hardness (to be inquired from the responsible waterworks), the dosage is between 30 and 50 ml Winter care product liquid per m³ water: for 0 - 20°dH ca. 30 ml/m³, for 20 - 30° dH ca. 40 ml/m³, for 30°dH ca. 50 ml/m³.

07537
GHS09, Umwelt, umweltgefaehrlich
Warning

FAQs from category Algicides:

Cause: Lime precipitates, not filtered particles
Solution: Adjust the pH level to 7.2 to 7.4 (by adding pH-Plus or pH-Minus). If there are suspended matters turn off the circulation pump and remove the flakes on the bottom with the pool cleaner after about 10-12 hours. Lime precipitates in the pool water (turbidity, shimmering white coating on the water surface, etc.) usually disappear shortly after adjusting the pH level and after the addition of a flocculants (while the filter system is running - WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!). Backwash thoroughly. Clean cartridge filter or replace by a new one.

Possible Causes: Faulty filter function, too many organic substances
Solution: Backwashing. If the filter system is calcified, use an acidic filter cleaner. If the filter system is ok, make a shock chlorination, meaning raise the chlorine level of the pool water up to 3 mg/l for a short time. The addition of flocculant is recommended as an additional measure (WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!). Backwash thoroughly. Clean cartridge filter or replace by a new one.

Possible cause: Too little disinfectant in the water, algae growth
Solution: Adjust the pH level to 7.2 to 7.4 by adding pH-Plus or pH-Minus. Let the filter system run continuously during the first 1-2 days. For disinfection with chlorine: Wipe dead algae from the pool walls. Remove algae from bottom with a brush and an aspirator. Make a shock chlorination, meaning raise the chlorine level of the pool water up to 3 mg/l. The addition of an algae protection is recommended. Backwash thoroughly. The added chlorine has degraded after a few days. Backwash thoroughly. If the water is not clear after 1-2 days, repeat the procedure. Cartridge filter system: Frequently clean or replace the cartridge. Alternatively, empty the pool completely, clean thoroughly and refill. After adjusting the pH value, treat the pool water with algicide to prevent new algae grow.

Possible cause: Iron deposits in the water
Solution: Adjust the pH level to 7.2 to 7.4 by adding pH-Plus or pH-Minus. Add flocculant. (WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!)  Extend the filter runtime, backwash the filter system thoroughly. In the case of a cartridge filter system, clean the cartridge regularly and replace it if necessary.

Possible cause: Inadequate chlorine dosing, non-degraded organic substances
Solution: Adjust the pH level to 7.0 to 7.4 by adding pH-Plus or pH-Minus. After a shock chlorination up to ca. 3 mg/l this smell will disappear after a short time.

Possible cause: Inadequate chlorine dosing, non-degraded organic substances
Solution: Adjust the pH level to 7.0 to 7.4 by adding pH-Plus or pH-Minus. If there is too little chlorine in the water, increase the chlorine content. If the chlorine content is too high, reduce the dosage or drain the pool water and refill with fresh water. Again, pay attention to the pH value.

Take a bucket of warm water, add the required amount of chemical for your pool and stir well. Then empty the bucket with the mixture evenly into the pool with the filter system switched on (circulating).

The lid of our chemical articles also serves as a dosing aid.

Our chemistry must be equipped with a safety lock for the protection of children. This requires some strength to open.

Safety data sheets are stored with the respective chemical article on our homepage. If you still cannot find what you are looking for, please contact us via our form on our helpdesk.

Important information

GENERAL INFORMATION: This product is to be used exclusively for the purposes stated in the description. The effect starts immediately after use. All dosing instructions base on experience values and are nonbinding.

Keep container in a cool, dry, well-ventilated place protected from light and frost. Always transport and store the container in an upright, vertical position.

Use biocides safely. Always read the label and product information before use.

Caution

Gefahrenhinweise: H410 Very toxic to aquatic life with long lasting effects.

Sicherheitshinweise: P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P312 Call a POISON CENTRE/doctor if you feel unwell. P391 Collect spillage. P501 Dispose of contents/container to hazardous or special waste collection point.

Contains: CAS 25988-97-0 N,N-Dimethyl-2-hydroxypropylammoniumchloride-polymer (12g/100g)

Symbol photos

The pictures shown are just for reference, the actual product may differ.