Filter Balls 70 g

  • Discount for 6 packs in the shopping cart
  • Replaces a standard Type A filter cartridge
  • Finer filtration: 1.5 μm instead of 20 μm
  • Easy to use
  • High dirt holding capacity
€9.99
pce
  • Buy 6 for €5.99 each and save 40%

Description

The Steinbach Filter Balls 70 g are the clever alternative to the classic type A filter cartridge - with convincing advantages: They filter significantly finer (up to 1.5 μm instead of around 20 μm with conventional filter cartridges), are lighter, easier to use and score points for their high dirt absorption and long service life. As a result, they not only ensure crystal-clear pool water, but also help to conserve resources. The filter balls are made of 100% polyethylene, are non-toxic, washable and easy to dispose of. They are also suitable for salt water and can be used for three to six months if cleaned regularly.

Tip for savers: When you buy 6 packs of 70 g Filter Balls, you benefit from an attractive quantity discount - the price per pack drops to just €5.99. The discount is automatically deducted in the shopping cart. One pack ideally replaces a conventional type A filter cartridge - so you get significantly more power at a lower price. So if you want more for your money and want modern, efficient filter technology, it's best to go straight for the Steinbach Filter Balls 70 g.

Technical Information

Filter mesh: 1,5 μm
Schüttdichte: 12,5 l/kg
Erwartete Einsatzdauer: 3 months
Pflegehinweise: Hand washing, not suitable for backwashing, not suitable for dryer
Suitable for salt water: yes
Article number: 040053

Please note that the products shown represent the current scope of delivery, as of 2026.

Videos

FAQ

As part of ongoing product improvements, filter balls may have slightly different diameters or appear more voluminous. This is completely normal and due to the production process. However, this does not affect the filter performance—regardless of the size or volume of the filter balls. Your water quality continues to be optimally protected.

In principle, it is possible to add Filter Balls to any conventional sand or cartridge filter system without any problems. 
For cartridge filter systems, please use the filter net included in the scope of delivery. Please refer to the technical data specified in the online shop for the correct filling quantity of filter medium for your model.
Please also note that you must not backwash with filter balls, as this can cause filter balls to get into the system and cause damage. When filling a two-chamber system, it is important that no filter balls get into the fresh water area. This could otherwise lead to blockages in the filter system and in the pipework.
If filter balls are used as a filter medium, do not use flock cartridges for water treatment.

Backwashing would pull the Filter Balls or filter Wool Flakes into the lines and clog them. The resulting pressure in the filter tank would be too high and could damage the filter tank.

Depending on the degree of soiling, the filter medium should be cleaned with a garden hose approximately every fortnight and then dried in the sun.

Documents

Spareparts

Looking for the matching spare part?

Important Notices

The use of flocculants is not recommended as this can cause the filter balls to clump!

Additional Information

Product images are for reference only and may not be an exact representation of the product.