Steinbach Steinbach

Housing for UV-disinfection system

040530
Art.
  • Compatible with Steinbach Classic 310/400
  • Chlorine and salt water resistant
  • Seamless integration, Ø 32/38 mm connections
  • Max. 15,000 l/h flow rate
  • Stable thanks to mounting ring

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€45.90
including VAT, plus shipping costs
In stock

Product information

The Housing for UV-disinfection system is ideal for retrofitting to the Steinbach Classic 310 and Classic 400 filter systems and offers you an efficient and simple solution for clean pool water. With connections of Ø 32/38 mm and a maximum flow rate of 15,000 l/h, it fits seamlessly into your existing filter circuit. Thanks to its salt water resistance, it is perfect for various pool types. Installation is uncomplicated: Simply attach it between the filter pump and the pool inlet nozzle. The fixing ring supplied ensures stability. Enjoy crystal-clear water with the UV disinfection system housing.

Retrofitting without additional material works for the filter systems: Classic 310 and Classic 400.
A small piece of hose (Ø 32/38 mm) and 2x hose clamps are required for retrofitting to the Classic 250N and Active Balls+ filter systems.

Connection size: Ø 32/38 mm
Salt water suitable: yes
Max. flow rate of external pump: 15,000 l/h

01 Befestigungsset
€6.99
including VAT, plus shipping costs
02 Container Oberteil
€5.49
including VAT, plus shipping costs
03 UV-Lampenschutz
€5.99
including VAT, plus shipping costs
04 O-Ring für Speedpart Container
€3.99
including VAT, plus shipping costs
05 Container Unterteil
At the moment this product is not available

FAQs from category Filter system accessories:

All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.

All filter systems and filter pumps have a sound pressure level* of < 70 dB(A).

*The emission volume is comparable to a large household appliance.

In this case, the filter medium used is often contaminated. The filter medium used (quartz filter sand or filter balls) is subject to a certain amount of wear and tear, even when operated as intended under optimal conditions, and should be replaced at regular intervals, depending on the operating time and degree of contamination. For sand filter systems, switch off the pump and then set the filter setting to ‚Rückspülen/backwash'. Switch the filter system on again. Carry out the backwash process until clean water comes out of the backwash line (max. 2 minutes). When using Filter Balls, do not backwash. If the filter performance decreases, we recommend washing the Filter Balls by hand. If necessary, the Filter Balls should be replaced. In cartridge filter systems, the filter medium should be changed approx. every 2 weeks.

If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.

If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.

The filter system should always be the first part in the water treatment system. The rest of the pool accessoires should only be connected after the filter system. A heat pump should ideally always be the last part in the water treatment system, so that the filtered, treated water flows through the heat pump and the path of the heated water into the pool is as short as possible.

Symbol photos

The pictures shown are just for reference, the actual product may differ.