Suggestions
Products
Spare parts
Looking for the matching spare part?
Experience pure beach feeling in your own garden. With the photorealistic ocean print on the inside and bottom of your pool, you will dive into a beautiful underwater world. Simply put together frame parts allow a quick and easy assembly of your pool. The water content is 4.485 l at a filling of 90%, the assembly time is only 30 min. A liner thickness for the floor of 0,27 mm and wall 0,50 mm ensure a high level of stability and safety. Refreshment, fun and good humour for the whole family are guaranteed with this Ø 305 x 76 cm large pool.
Please note that the products shown represent the current scope of delivery, as of 2026.
Important notes: This pool is not suitable for building into the ground. Assembly is easiest with two people. Approximate assembly time, depending on the equipment option and size, is from approx. 30 min (without preparation work for sub-construction or filling). Watertightness/Class: W0. EN 16582-1 / EN 16582-3. Pool assembly requires an appropriately prepared setup site, which must be absolutely flat and even. The sub-surface must be solid enough to accommodate the weight of a filled pool regardless of the weather. In addition, leaking pool water must be able to flow off easily without causing any damage. Not winterproof. Symbolic photos - The pictures shown are for reference only, the actual product may vary.
Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.
Product images are for reference only and may not be an exact representation of the product.