Steinbach
PVC elbow 90°
- High quality plastic
- Chlorine and salt water resistant
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The PVC elbow 90° made of high-quality plastic for chlorine and salt water pools serves as a connecting piece of hoses and is simply glued. D = Outer diameter, DN (nominal diameter) = inside diameter
PN 10, D 110, DN 100
FAQs from category Pipes:
Yes, but note that the hose must be cut straight, deburred and cleaned. In addition, more glue has to be applied. It is easier with the appropriate adapter screw connection.
This is not intended. There are sufficient possibilities to create transitions, the parts required for this are listed in our brochure ("Individual components Styrofoam pools").
It is best to use our 2" double nipples (art.no. 062085) - Please note that you also need flat gaskets for sealing (art.no. 0409331).
This can sometimes happen due to production reasons; please refer to our notes in the operating instructions. Weak dripping is best eliminated by wrapping Teflon tape over the affected connections.
This is due to the fact that the seals are lubricated inside with a lubricant - on the one hand for sealing and on the other hand so that the components can be adjusted more easily (plastic on plastic). After the first couple of turns, the lever will turn smoothly.